M5PoECAM-W

SKU:U121-B

Description

PoECAM-W is an open source fully programmable camera integrating PoE (Power Over Ethernet) and Wi-Fi. This item is ESP32 based webcam with W5500 embedded Ethernet controller, plus 2M pixel image sensor OV2640. PoECAM-W is equipped with a combination of 8MB PSRAM + 16MB Flash large memory. This teeny tiny with flexible power supply, you can get stable image by connecting the network cable in just 2 steps. It's wonderful for you to monitor warehouse, auto image acquisition, etc.

Features

  • Built-in ESP32 MCU(support WIFI)
  • 2 million pixel camera 0V2640
  • Ethernet chip W5500
  • LAN speeds up to 10M or 100M (depending on the line provided)
  • PoE IEEE802.3 AF specification(Maximum power 6W)
  • Built-in prompt LED light
  • Development platform:Arduino、ESP-IDF
  • Ethernet standard interface RJ45
  • Standard LEGO interface and camera mount

Includes

  • 1 x PoECAM-W
  • 1 x Camera mount clip
  • 1x Brick compatible clip

Applications

  • Warehouse monitoring
  • Timed photograph
  • Machine vision
  • Smart home monitoring

Specification

Resources Parameters
MCU ESP32-D0WDQ6-V3
Camera Module OV2640
Ethernet Chip W5500
FLASH 16MB
PSRAM 8MB
Pixel Size 2.2 µm x 2.2 µm
Automatic image control functions Automatic Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band Filter (ABF), and Automatic Black-Level Calibration (ABLC)
Supports Hardwired TCP/IP Protocols TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
DFOV 65°
Output Formats(8-bit) • YUV(422/420)/YCbCr422 • RGB565/555 • 8-bit compressed data • 8-/10-bit Raw RGB data
Ethernet interface specifications RJ45
MAXIMUM POWER 6W
Product Size 64mm × 24mm × 18mm
Package Size 80mm × 37mm × 32mm
Product Weight 38g
Package Weight 45g

EasyLoader

EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.

Download Windows Version Easyloader

Schematic

schematics

Pin mapping

M5Core(GROVE A) SCL SDA 5V GND
PoECAM-W GPIO33 GPIO25 5V GND

Module Size

module size

Examples

Notes:
1. PoECAM-WTo download the program, you need to connect an external ESP32 burner,you can Click here to buy the M5's official ESP32-Downloader kit, which includes a transfer board for easier connection

Arduino

PoECAM HTTP STREAM

Video