Module 6060-PUSH

SKU:K028

Description

This an application-level module, which implements a motion & robotic control and it is totally customizable with different length. Packed with Stepper motor, Mega328 microprocessor, RS485 serial bus, 1515 framework. It realized a linear motion control, you can program the stepper motor to move a certain length with high precision. This type of module can be applied to 3D print, linear push and etc.

This product is EOL now.

Product Features

  • Mega328 inside: GRBL
  • Customizable: length & distance
  • RS485
  • 1515 Aluminum Profile frame
  • 48 stepper motor: 2 phase 4 lines
  • Itinerary: 57mm
  • Input voltage: 12-24V
  • Motor power: 10W

Include

  • 1x 6060 module

Applications

  • 3D printer
  • Linear motion

Specification

Resources Parameter
Net weight 569g
Gross weight 600g
Product Size 166*60*60mm
Package Size 166*60*60mm

Learn

This uses the stepper driven 6060 push and rs485. The movement is based on the tilt of the M5stick which is measured with the built-in IMU.
AI camera that automatically sorting out the garbage.
Pilot a Push6060 with ATOM and Tail485 with IUFLOW

Example


#include <M5Stack.h>
#define RX_PIN      16
#define TX_PIN      17
  
#define X_LOCAL 40
#define Y_LOCAL 40

#define X_OFF 160
#define Y_OFF 30

int distance = 0;    //步进电机移动步进值

void header(const char *string, uint16_t color){     //Title
    M5.Lcd.fillScreen(color);
    M5.Lcd.setTextSize(1);
    M5.Lcd.setTextColor(TFT_MAGENTA, TFT_BLUE);
    M5.Lcd.fillRect(0, 0, 320, 30, TFT_BLUE);
    M5.Lcd.setTextDatum(TC_DATUM);
    M5.Lcd.drawString(string, 160, 3, 4);
}

void setup() {
    M5.begin();
    M5.Power.begin();

    header("PUSH 6060", TFT_BLACK);
    M5.Lcd.setTextFont(2);
    M5.Lcd.setTextColor(TFT_WHITE, TFT_BLACK);  
    Serial2.begin(9600, SERIAL_8N1, RX_PIN, TX_PIN);  //Configure serial port 2
    delay(500);
    Serial2.print("ID=123\r\n");                     //Serial port 2 output ID=123\r\n, configuration 6060 motor ID is 123
}


void loop() {
    if(M5.BtnA.wasPressed()){                      //Press button A to send ID\r\n to view 6060 motor ID.
      Serial2.print("ID\r\n");
    }
    if(M5.BtnB.wasPressed()){                      //Press button B to send the ID123: X%d\r\n to control the absolute travel, where %d is the variable distance
      if(distance < 50){
         distance +=10;
         Serial2.printf("ID123:X%d\r\n",distance);
      }
    }
    if(M5.BtnC.wasPressed()){                      //Press C to send ID123Z\r\n and the motor returns to the origin.
      Serial2.print("ID123Z\r\n");
    }
    if(Serial2.available()){                       //Serial port 2 receives the message returned by 6060 and prints
      char c = Serial2.read();
      Serial.print(c);
    }
    M5.update();
}

Arduino Uno Driver Demo