COM.LTE-DATA is a stackable multifunctional LTE communication module with built-in LTE communication module A7600C1, supporting LTE-TDD/LTE-FDD/EDGE/GPRS and GSM frequency bands, and the transmission rate is LTE.CAT1 standard.
Its performance is stable, the appearance is small and well designed, the cost performance is high and can transmit data with low power consumption. The module has a DC power input and can provide 5V-12V power supply through an external power supply.
In order to facilitate the user to configure the pin, the DIP switch is used to set the pin. This module is especially suitable for remote meter reading, smart phones, smart wearables, smart parking, municipal management and other IoT industries with low power consumption and compact size as the core requirements.
This product is EOL now.
When used with the FIRE main control, due to the PSRAM pin conflict, please switch the DIP switch pins of the module base to TX(0/13), RX(5/15), and the device can use USB/ External DC is used for power supply.
When used with Core2 series main control, due to the different order of the base pin array, COM.X base pins TX(16), RX(17) correspond to the actual pins TX(14), RX of the Core2 main control (13) The equipment needs to use external DC for power supply.
Frequency band:
Data transmission speed:
Protocol
Resources | Parameter |
---|---|
Frequency band | LTE-FDD/LTE-TDD/WCDMA/GSM |
Network protocol | TTCP/IP/IPV4/IPV6/ Multi-PDP/FTP/FTPS/HTTP/ HTTPS/DNS etc. |
Communication | UART 115200bps |
DC interface specifications | 5.5mm |
Net Weight | 54g |
Gross Weight | 89g |
Product Size | 54.2*54.2*13.2mm |
Package Size | 165*60*36mm |
The module base has a DC power input interface. Please strictly follow the input range (5-12V) to prevent damage to the module when using this interface to connect to the power supply. The internal power DIP switch can adjust the voltage level of the internal terminal VIN to adapt to different modules.
The following content is for reference only.
North America | B4 (1700), B12 (700), B66 (1700), B71 (600), B26 (850) |
---|---|
Asia Pacific | B1(2100), B3(1800), B5(850), B8(900), B18(850), B20(800), B26(850),B28(700) |
Europe: | B3 (1800), B8 (900) , B20 (800) |
Latin America | B2(1900), B3(1800), B5(850), B28(700) |
Commonwealth of Independent States | B3 (1800), B8 (900), B20 (800) |
Sub-Saharan Africa | B3(1800), B8(900) |
Middle East, North Africa | B8(900), B20(800) |
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
Description:
Check signal strength,Register to the network,5 and 13 of the DIP switch are set to ON.
M5Stack | TX(GPIO0/13/17) | RX(GPIO5/15/16) | 5V | GND |
---|---|---|---|---|
COM.LTE-DATA | RX | TX | VIN | GND |
According to the different needs of different hosts, the DIP switch fluctuates to the corresponding pin.
M5Stack HOST | CORES3 | CORE2 | CORE |
---|---|---|---|
RXD | 17/0/7 | 14/0/19 | 17/0/13 |
TXD | 18/1/13 | 13/33/2 | 16/5/15 |
To get complete code, please click here