Module STEPMOTOR

SKU:M012

Description

STEPMOTOR is used for stepper motor control. It is perfect for any motion project as it can drive up to 3 Stepper motors with GRBL control.

It is built with MEGA328P has been flashed GRBL firmware. The module communicates with M5Core via I2C(0x70)

Integrated 3 DRV8825, a simple but very powerful board that can control one bipolar stepper motor at the time and allows micro stepping up to 1/32 of a step.

Product Features

  • 9-24V Power Input
  • 3-way stepper motors (X, Y, Z)

Include

  • 1x Step Motor Module
  • 12V Power (Optional)
  • 1x 5V FAN Module for heat dissipation (Optional)

Applications

  • DIY 3D Printer
  • Simple Robot Arm

Specification

Resources Parameter
DC Interface XT30
Motor Interface HY2.0-4P
Net weight 24g
Gross weight 34g
Product Size 54.2*54.2*12.8mm
Package Size 60*57*17mm

EasyLoader

download EasyLoader

1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed.

2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click "Burn" to start burning.

3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. Click here to download driver

PinMap

Mega328 ISPDownload interface Pin foot definition

MBUS PinMap

Schematic

Learn

An expandable turntable created using M5Stack Products.

Example

Arduino IDE

The code below is incomplete. TO get complete code, please click here

UIFlow

Wanna explore the easiest way of Servo programming?? Check out the Blockly Platform at UIFlow

To get complete code, please click here