NanoC6

SKU:C125

Description

NanoC6 is a compact, low-power IoT development board in the M5Stack development kit series. It features the ESP32-C6FH4 as its SoC, supporting advanced wireless communication methods such as Wi-Fi 6 and ZigBee, and includes a built-in infrared emitter for convenient control of infrared IoT devices. The onboard ceramic antenna ensures stable wireless communication.

Additionally, the device is equipped with programmable RGB LEDs, allowing for personalized visual effects in projects. The inclusion of a Grove interface enables flexible expansion with various M5 devices (customizable to connect different types of devices, such as those following UART/I2C communication protocols), providing developers with rich hardware expansion possibilities.

This development board is suitable for smart homes, industrial automation, health monitoring, and IoT devices, offering a comprehensive development solution for innovative projects.

Note

WiFi 6

M5NanoC6 is the first core control board to support WiFi 6, supporting the 2.4 GHz Wi-Fi 6 protocol (802.11ax) and backward compatibility with 802.11 b/g/n.
WiFi 6 offers higher speeds, greater capacity, lower latency, and enhanced security compared to previous WiFi protocols.

Tutorial

Arduino IDE

This tutorial will guide you on how to program and control the M5NanoC6 device using the Arduino IDE

Features

Supports (2.4GHz) Wi-Fi 6, Zigbee, and Thread, Matter wireless protocols
Built-in infrared LED and RGB
Equipped with Grove interface
Ceramic antenna
Compact size
Development Platform
- UiFlow2
- Arduino IDE
- ESP-IDF
- PlatformIO

Includes

1 x NanoC6

Applications

Smart home systems
Industrial control systems
Environmental monitoring systems
Agricultural IoT systems
Healthcare
Consumer electronics
Service robots

Specifications

Specification	Parameter
SoC	ESP32-C6FH4@RISC-V single-core, main frequency 160MHz, supports CDC
Flash	4MB
Wi-Fi	2.4 GHz Wi-Fi 6 (802.11ax), backward compatible with 802.11b/g/n
Zigbee	Zigbee 3.0
Thread	Thread 1.3
Matter	Supported
RGB	WS2812
IR Remote Parameters	IR transmission distance at ∠0°: 632CM IR transmission distance at ∠45°: 83CM IR transmission distance at ∠90°: 29CM
Grove Maximum Output Current	DC 5V@600mA (Output capability depends on USB power supply capacity)
Standby Current (Deep Sleep Mode)	USB Type-C power supply: DC 5V@125.5uA Grove power supply: DC 5V@50uA
Standby Current (ULP Mode)	USB Type-C power supply: DC 5V@252uA Grove power supply: DC 5V@201.5uA
Operating Current	In Wi-Fi mode: DC 5V@106.2mA
Wi-Fi Range Test (Antenna facing up, back facing the test)	54.9m
Operating Temperature	0 ~ 40°C
Product Size	23.5 x 12.0 x 9.5mm
Product Weight	2.7g
Package Size	100.6 x 80.0 x 10.5mm
Gross Weight	11.4g

Learn

Download Mode

How to Enter Download Mode

To enter download mode for programming, hold down the GPIO9 button and then connect the data cable.

Schematics

NanoC6 Schematics PDF

1/1

PinMap

IR & RGB & Button & LED

ESP32-C6FH4	GPIO3	GPIO20	GPIO19	GPIO9	GPIO7
IR	IR
WS2812		WS2812	EN(RGBPWR)
BUTTON				BUTTON
LED(Blue)					LED(Blue)

RGB Light Usage Notice:

When using the RGB function, set pin G19 to a high level to enable power supply.

HY2.0-4P

HY2.0-4P	Black	Red	Yellow	White
PORT.CUSTOM	GND	5V	G2	G1

Model Size