CoreInk Proto Base
Description
CoreInk Proto Base is a DIY expansion kit suitable for CoreInk master control. When stacking the expansion board, the IO bus on the CoreInk main control will be led out to the PROTO board through the lower PIN pin. You can design and build the circuit according to your own needs. The package also contains a variety of expansion parts (HY2.0-4P female terminal, 3.96 male/female terminal, DC power terminal, etc.), which can be soldered to the PROTO board, which can add standard specifications to your circuit design. Output Interface. The hook hole on the back and the LEGO compatible hole design on the corners make it easy for you to embed the finished DIY product into a variety of structures.
Features
- Compatible with CoreInk
- Prototype circuit design
- PROTO board
Includes
- 1x CoreInk Proto Base (face shell + bottom shell)
- 1x HEX KEY
- 3x HY2.0-4P socket terminals (red x1, blue x1, black x1)
- 4x HT3.96R-4P pins
- 4x HT3.96R-4P socket
- 1x HT3.96R-2P pin
- 1x HT3.96R-2P socket
- 1x DC-044 socket terminal
- 4x M2*6 cup head tapping screws
- 1x PROTO DIP header
- 3x port block
Applications
- Experimental circuit
- DIY function expansion
Specifications
| Specifications | Parameters |
|---|---|
| Net weight | 34g |
| Gross weight | 46g |
| Product size | 56*40*16mm |
| Package size | 83*54*26mm |
| Shell material | Plastic (PC ) |
Pin mapping
- The IO bus on the CoreInk main control will be led out to the PROTO board through the PIN pin
| CoreInk | GPIO | ADC | SCL | SDA | MOSI | MISO | SCK | TXD2 | RXD2 | GND | 5V IN | 5V OUT | 3.3V | BAT | RST |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CoreInk | G25,26 | G36 | G22 | G21 | G23 | G34 | G18 | G14 | G13 | GND | 5V IN | 5V OUT | 3.3V | BAT | RST |
Video
Integrate 433MHz radio frequency module through CoreInk PROTO BASE welding to realize intelligent furniture control.