EasyLoader (beta)

Current Product Don't Have Test Firmware

Note: pls, use PC chrome/edge browser, if can't connect, refresh the webpage.

1. Click connect button

2. After connected successfully, pick a firmware

3. Click the burn button

4. After burning successfully, Unplug the device and restart.

0%

HUB

SKU:U006

描述

HUB 是一款 HY2.0-4P 接口的拓展器,其功能是能将 1个 HY2.0-4P 接口拓展为3个,使得能够同时连接更多的Unit传感器,比如不同I2C地址的传感器或同时向3个设备输出电平。

注意: 同时连接 2 - 3 个 I2C 接口 (红色接口) 同样的Unit 的话,将会引起 I2C 地址冲突.使用 I2C HUB Unit 取代 HUB Unit 能够以避免 I2C 地址冲突的发生.

产品描述

  • HY2.0-4P 拓展器
  • 2x LEGO 兼容孔

包含

  • 1x HUB Unit
  • 1x HY2.0-4P线缆

规格参数

规格 参数
净重 5g
毛重 17g
产品尺寸 32*24*12mm
包装尺寸 67*53*12mm

原理图

项目案例

Health monitor - Waylay IO
Health monitoring using the M5Stack Mini Heart Rate Unit and Non-Contact Infrared Thermometer Unit and the Waylay IO IoT platform.
M5stack based PFD (Primary Flight Display)
An attempt to create a realtime "Artificial Horizon" on the M5.
Q-Bot
We aim to build a robot that is effective in sanitizing surfaces without putting cleaners in harm's way.
M5Stack Based PID Control Learning Platform
The PID Control Learning Platform is based on an M5Stack Fire & BaseX with TOF and Accel Units, and some Lego NXT parts.