SKU:U023
RELAY as it says is an M5Unit that implement a Relay functions. Relay can be used as an electrically operated switch, uses an electromagnet to mechanically operate a switch, where it is necessary to control a large power load circuit by a separate low-power signal such as digital signal output from a microprocessor.
The Relay support input voltage of up to 30V DC and 220V AC.
There are 3 pins named: ON, OFF, COM. You can program to make COM connect to ON or OFF, just by high and low out put of a digital GPIO.
Resources | Parameter |
---|---|
Single relay power consumption | 5V@40mA |
Coil operating time | 6ms |
Coil release time | 4ms |
Net weight | 12g |
Gross weight | 26g |
Product Size | 48*24*21mm |
Package Size | 60*57*17mm |
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
Download Windows Version Easyloader Download MacOS Version Easyloader
M5Core(GROVE B) | GPIO36 | GPIO26 | 5V | GND |
---|---|---|---|---|
RELAY Unit | RELAY Controlling Pin | 5V | GND |
Program with UIFlow