EasyLoader (beta)

Current Product Don't Have Test Firmware

Note: pls, use PC chrome/edge browser, if can't connect, refresh the webpage.

1. Click connect button

2. After connected successfully, pick a firmware

3. Click the burn button

4. After burning successfully, Unplug the device and restart.

0%

Panel Frame

SKU:A125

Description

Panel Frame is a frame construction for fixing Core1, Core2 and Tough series M5Core. Offering two installation methods of screw and double-sided adhesive tape. For M5Tough installation, 3M waterproof double-sided adhesive tape can provide waterproof function. For the M5Core (Core1, Core2), four plastic pads are to be installed into four corners of the frame, to make the M5Core surface in parallel with PanelFrame. Customer can choose the method of cutting holes, with the help of attached card paper.

Include

  • 1 x Panel Frame
  • 1 x Plastic Pad part (4 pcs included)
  • 2 x Die-cut 3M Waterproof Double-sided Adhesive Tape
  • 1 x Card Paper with Dimension Indication
  • 4 x M3 x 16 stainless steel hexagon screws
  • 2 x M3 x 14 stainless steel hexagon screws

Specification

Spec Parameter
Net Weight 8.96g
Gross Weight 24g
Product Size 72mm x 64mm x 18.4mm
Package Size 165mm x 118mm x 19mm

Dimensional drawings

Instructions

FAQ

Q1: How do I remove the speaker floor noise when the M5Core is on or running?

Q2: How does M5Core2 stack modules?

Q3: A timeout error is displayed when uploading the program to the device

Q4: How to solve the phenomenon of automatic signal triggering of M5Core button A

Q5: M5 device battery life

Q6: Can multiple modules with batteries be stacked at the same time?

Q7: M5 master supports WiFi connection to 5G frequency band

Q8: The RS485 device cannot communicate normally/data is garbled. Packet loss, etc.

Q9: The difference between different masters and camera products

Q10: M5 camera image blur, how to adjust the focal length

Q11: The control RGB LED pin of FACE II BOTTOM conflicts with the I2S DOUT pin of CORE2

Q12: Does the battery run out of power quickly?

Q1: How to read the programmed firmware?

Q2: Several solutions for esp32 board download failure in Arduino IDE board management

Q3: Arduino SPIFFS file upload operation

Q4: When M5Burner burns firmware, an error pop-up window or exception occurs

Q5: Does the M5 master device support multi-language display (Chinese, English, Japanese, Russian, etc.)?

Q6: The program cannot load the SD card normally

Q7: How to use Bluetooth, HTTP, SD, WebServer, FreeRTOS and other features in Arduino IDE

Q8: How to download programs for STAMP C3U

Q9: How STAMP C3U defines UART0 output mode

Q10: Unable to connect to UIFlow Desktop IDE

Q11: NBIoT devices cannot connect to the network normally