pdf-icon

CONTENTS

FLIR

SKU:K021

Preview
Preview
Preview
Thumbnail
Thumbnail
Thumbnail

Description

FLIR features the latest FLIR Lepton 3.0 long wave-infrared (LWIR) camera core, get two times the resolution and 4x the pixels of the previous 2.x generation

FLIR is covered by a 3D printing case, makes it a perfect functional bottom for non-contact temperature measurement, compatible with M5Core and can be controlled via I2C protocol.

The effective image generate by the Lepton sensor is 160×120, but you can process the image thru program and display a different resolution.

This product is EOL now, we've released the updated version M5StickT2 ESP32 Thermal Camera Development Kit (Lepton 3.0) which is fully compatible with this product.

Note: If it worked for long hours, Lepton will heat up a little. But the output image is not affected.

Features

  • 160×120 Effective Pixels
  • Lepton Low operating power — 150 mW (operating), 650 mW (during shutter event), 5 mW (standby)
  • Field of view: 56°, with shutter
  • Lepton Input Supply Voltage: 1.2V,2.8V,2.5V - 3.1V IO
  • Fast imaging time ( 0.5 second)

Include

  • 1x FLIR

Applications

  • Car engine failure check
  • Building dehumidification insulation sealing test
  • Industrial furnace inner wall refractory crack
  • Outdoor observation of animals at night

Specifications

Resources Parameter
Net weight 17g
Gross weight 34g
Product Size 54*54*13mm
Package Size 125*67*23mm

Lepton Parameter

*Lepton Parameter item* *Parameter value*
Effective Frame Rate 8.7Hz
Input Clock 25-MHz
Pixel Size 12µm
Scene Dynamic Range Low Gain Mode: -10 to 400°C. High Gain Mode: -10 to 140°C
Spectral Range 8 µm to 14 µm
Thermal Sensitivity ＜50 mK(0.050℃)
Input Supply Voltage 2.8 V, 1.2 V, 2.5 V - 3.1 V IO
Optimum Temperature Range -10 °C to +80 °C

Easyloader

download EasyLoader

What is EasyLoader?
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed.

2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click "Burn" to start burning.

3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. Click here to download driver

Example

Arduino