Core2 For AWS
SKU:K010-AWS
Tutorial
Description
Core2 for AWS is the reference hardware kit for AWS IoT Kit – a prescriptive learning program from AWS which makes it easy and cost effective to learn how to build IoT applications using AWS services. It comes equipped with a Microchip ATECC608 Trust&GO pre-provisioned secure element, in addition to the existing features of the standard M5Stack Core2 and M5GO Bottom2. The Core2 for AWS is a feature rich, plug and play extensible, and secure hardware kit for learning and building a wide range of IoT applications.
To learn more about the Core2 for AWS IoT Kit program, visit https://core2-for-aws-docs.m5stack.com
The Core2 for AWS comes with an ESP32-D0WDQ6-V3 micro controller, which features dual Xtensa 32-bit LX6 cores and a main frequency up to 240Mhz, with 2.4GHz Wi-Fi. Comes with 8MB PSRAM and 16MB flash on board.
The main unit is equipped with a 2.0-inch capacitive touch screen that provides a smooth and responsive human machine interface. The built-in vibration motor can be used to provide haptic feedback or alerts. Onboard RTC module provides accurate time of day. Power is supplied through an AXP192 power management chip, to monitor and control power attributes of the device. The included TF card slot supports microSD cards up to 16GB. The on-board speaker is paired with an I2S digital audio interface power amplifier chip to reduce signal distortion and provide clearer audio output. There are independent physical power and reset (RST) buttons on the sides of Core2 for AWS, with 3 programmable touch buttons on the front of the screen.
The M5GO Bottom2 for AWS adds additional features and security for IoT applications. The MPU6886 provides 6-axis internal IMU and temperature, the SPM1423 digital microphone captures audio for recording or creating voice applications, 10 individually programmable RGB LEDs via SK6812 to create customized and animated light effects, a 500mAh lithium-ion battery provides power on the go, the onboard Microchip ATECC608 Trust&GO crypto-authentication chip is pre-provisioned with secure keys to simplify connectivity to AWS and accelerate cryptographic computation.The CP2104 chip interface is reserved on the PCB of Core2 for AWS to interface with the lithium battery.
For all questions or issue regarding this device, pls visit our forum: https://forum.m5stack.com/category/41/core2-for-aws
Power Management
Power on: One click the power button on the left
Power off: Long press the left power button for 6 seconds
Reset: Click the RST button on the bottom side
Extensions
The vibration sensor of M5Core2 and M5 Base series are incompatible in mechanical design. Please do not stack them together.
Product Feature
- Reference hardware kit for use with AWS IoT Kit
- ESP32-D0WDQ6-V3, supports 2.4GHz Wi-Fi
- 16M Flash, 8M PSRAM
- Built-in ATECC608 hardware encryption chip
- Capacitive touch screen
- Built-in PDM microphone, power indicator, 6-Axis IMU, vibration motor, I2S codec, Amplifier, Speaker, RTC, power button, reset button, 10 x RGB LEDs
- TF card slot (support up to 16GB)
- Built-in 500mAh Lithium ion battery, equipped with power management chip
- Validated through AWS Device Qualification Program
- Compatible with multi-platform development:
Include
- 1x M5Stack Core2
- 1x M5GO Bottom2 for AWS
- 1x Type-C USB (50cm)
- 1x HEX KEY
Applications
- Internet of Things Controller
- STEM Education
- DIY projects
Specifications
| Resources | Parameter |
|---|---|
| ESP32-D0WDQ6-V3 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi |
| Flash | 16MB |
| PSRAM | 8MB |
| Hardware encryption chip | ATECC608B-TNGTLSU-G (addr 0x35) |
| Input voltage | 5V @ 500mA |
| Host interface | TypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1 |
| Programmable LED light | SK6812*10 |
| Button | Power button, RST button, virtual screen button * 3 |
| Vibration reminder | Vibration motor |
| IPS LCD screen | 2.0"@320*240 ILI9342C |
| Capacitive touch screen IC | FT6336U |
| Speaker | 1W-0928 |
| Microphone | SPM1423 |
| I2S power amplifier | NS4168 |
| IMU | MPU6886 |
| RTC | BM8563 |
| PMU | AXP192 |
| USB chip | CP2104 |
| DC-DC boost | SY7088 |
| TF card slot | Support up to 16G |
| Lithium battery | 500mAh @ 3.7V |
| Antenna | 2.4G 3D antenna |
| Working temperature | 32°F to 104°F (0°C to 40°C ) |
| Net weight | 101g |
| Gross weight | 108g |
| Product size | 54 x 54 x 24mm |
| Package size | 90 x 60 x 27mm |
| Shell material | Plastic (PC ) |
Driver Installation
CP2104 version)/CP34X (for CH9102 version) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. (If you are not sure of the USB chip used by your device, you can install both drivers at the same time. During the installation process of CH9102_VCP_SER_MacOS v1.7, an error may occur, but the installation is actually completed, just ignore it.) When using it, if If the program cannot be downloaded normally (the prompt is overtime or Failed to write to target RAM), you can try to reinstall the device driver.| Driver name | Applicable driver chip | Download link |
|---|---|---|
| CP210x_VCP_Windows | CP2104 | Download |
| CP210x_VCP_MacOS | CP2104 | Download |
| CP210x_VCP_Linux | CP2104 | Download |
| CH9102_VCP_SER_Windows | CH9102 | Download |
| CH9102_VCP_SER_MacOS v1.7 | CH9102 | Download |
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
Core2 for AWS factory default example.
PinMap
LCD & TF card
LCD :320x240 TF card Maximum size 16GB
| ESP32 Chip | GPIO38 | GPIO23 | GPIO18 | GPIO5 | GPIO15 | |||
|---|---|---|---|---|---|---|---|---|
| AXP192 Chip | AXP_IO4 | AXP_DC3 | AXP_LDO2 | |||||
| ILI9342C | MISO | MOSI | SCK | CS | DC | RST | BL | PWR |
| ESP32 Chip | GPIO38 | GPIO23 | GPIO18 | GPIO4 |
|---|---|---|---|---|
| TF Card | MISO | MOSI | SCK | CS |
CAP.TOUCH (I2C Addr: 0x38)
| ESP32 chip | GPIO21 | GPIO22 | GPIO39 |
|---|---|---|---|
| AXP192 | |||
| FT6336U | SDA | SCL | INT |
Mic & NS4168
| ESP32 Chip | GPIO12 | GPIO0 | GPIO2 | AXP_IO2 | GPIO34 |
|---|---|---|---|---|---|
| NS4168 | BCLK | LRCK | DATA | SPK_EN | |
| SPM1423 | CLK | DATA |
AXP Power Indicator Light
| AXP192 | AXP_IO1 | AXP_LDO3 |
|---|---|---|
| Green LED | Vcc | / |
| Vibration motor | Vcc |
RTC
| ESP32 Chip | GPIO21 | GPIO22 | |
|---|---|---|---|
| AXP192 | AXP_PWR | ||
| BM8563 | SDA | SCL | INT |
IMU(3-axis gyroscope & 3-axis accelerometer) &Pogo Pin
| ESP32 Chip | GPIO21 | GPIO22 |
|---|---|---|
| MPU6886 | SDA | SCL |
| Pogo Pin | SDA | SCL |
USB to serial chip
| ESP32 Chip | GPIO1 | GPIO3 |
|---|---|---|
| CP2104 | RXD | TXD |
PSRAM
| ESP32 Chip | GPIO8 | GPIO7 | GPIO10 | GPIO9 | GPIO17 | GPIO16 |
|---|---|---|---|---|---|---|
| ESP-PSRAM64H | SI/SIO0 | SO/SIO1 | SIO2 | SIO3 | SCLK | CS# |
SK6812-LED
| ESP32 Chip | GPIO25 |
|---|---|
| SK6812-LED | DATA |
Internal I2C connection
| ESP32 Chip | GPIO21 | GPIO22 |
|---|---|---|
| MPU6886 | SDA | SCL |
| AXP192 | SDA | SCL |
| BM8563 | SDA | SCL |
| FT6336U | SDA | SCL |
| ATECC608 | SDA | SCL |
Charging current measured value
| charging current | Fully charged current(Power OFF) | Fully charged current(Power ON） |
|---|---|---|
| 0.219A | 0.055A | 0.147A |
M5Core2 M-BUS Schematic diagram
M5Core2 PORT
HY2.0-4P-PortA(Red)
| ESP32 Chip | GPIO32 | GPIO33 |
|---|---|---|
| PortA | GPIO32(SDA) | GPIO33(SCL) |
M5GO-Bottom For AWS PORT
HY2.0-4P-PortB(black)
| ESP32 Chip | GPIO26 | GPIO36 |
|---|---|---|
| PortB | GPIO26(DAC) | GPIO36(ADC) |
HY2.0-4P-PortC(blue)
| ESP32 Chip | GPIO13 | GPIO14 |
|---|---|---|
| PortC | GPIO13(RXD2) | GPIO14(TXD2) |
ESP32 ADC/DAC
| ADC1 | ADC2 | DAC1 | DAC2 |
|---|---|---|---|
| 8 channels | 10 channels | 2 channels | 2 channels |
| G32-39 | G0/2/4/12-15/25-27 | G25 | G26 |
For more information about Pin assignment and Pin Remapping, Please refer to ESP32 Datasheet
Schematic
Related Link
Datasheet
API
Example
Arduino
Tutorial
Model Size
Video
Version Change
| Release Date | Product Change | Note: |
|---|---|---|
| 2023.27 | Cancel RTC coin cell batteries | Does not affect the timing function |