pdf-icon

Core2 for AWS

SKU:K010-AWS

Tutorial

This tutorial will show you how to control Core2 for AWS devices through the UIFlow graphical programming platform
This tutorial will show you how to control the Core2 for AWS device through the UIFlow2.0 graphical programming platform
This tutorial will show you how to program and control Core2 for AWS devices through Arduino IDE
This tutorial will show you how to control Core2 for AWS devices through Micropython programming
This tutorial will show you how to control Core2 for AWS devices through AWS FreeRTOS programming

Description

Core2 for AWS is the reference hardware kit for AWS IoT Kit – a prescriptive learning program from AWS which makes it easy and cost effective to learn how to build IoT applications using AWS services. It comes equipped with a Microchip ATECC608 Trust&GO pre-provisioned secure element, in addition to the existing features of the standard M5Stack Core2 and M5GO Bottom2. The Core2 for AWS is a feature rich, plug and play extensible, and secure hardware kit for learning and building a wide range of IoT applications.

To learn more about the Core2 for AWS IoT Kit program, visit https://core2-for-aws-docs.m5stack.com

The Core2 for AWS comes with an ESP32-D0WDQ6-V3 micro controller, which features dual Xtensa 32-bit LX6 cores and a main frequency up to 240Mhz, with 2.4GHz Wi-Fi. Comes with 8MB PSRAM and 16MB flash on board.

The main unit is equipped with a 2.0-inch capacitive touch screen that provides a smooth and responsive human machine interface. The built-in vibration motor can be used to provide haptic feedback or alerts. Onboard RTC module provides accurate time of day. Power is supplied through an AXP192 power management chip, to monitor and control power attributes of the device. The included TF card slot supports microSD cards up to 16GB. The on-board speaker is paired with an I2S digital audio interface power amplifier chip to reduce signal distortion and provide clearer audio output. There are independent physical power and reset (RST) buttons on the sides of Core2 for AWS, with 3 programmable touch buttons on the front of the screen.

The M5GO Bottom2 for AWS adds additional features and security for IoT applications. The MPU6886 provides 6-axis internal IMU and temperature, the SPM1423 digital microphone captures audio for recording or creating voice applications, 10 individually programmable RGB LEDs via SK6812 to create customized and animated light effects, a 500mAh lithium-ion battery provides power on the go, the onboard Microchip ATECC608 Trust&GO crypto-authentication chip is pre-provisioned with secure keys to simplify connectivity to AWS and accelerate cryptographic computation.The CP2104 chip interface is reserved on the PCB of Core2 for AWS to interface with the lithium battery.

For all questions or issue regarding this device, pls visit our forum: https://forum.m5stack.com/category/41/core2-for-aws

Power Management

Operations:
Power on: One click the power button on the left
Power off: Long press the left power button for 6 seconds
Reset: Click the RST button on the bottom side

Extensions

The vibration sensor of M5Core2 and M5 Base series are incompatible in mechanical design. Please do not stack them together.

Some of the screen edges will have touch non-linearity problem, you can try to use M5Tool to upgrade the screen firmware to solve this problem.

Product Feature

  • Reference hardware kit for use with AWS IoT Kit
  • ESP32-D0WDQ6-V3, supports 2.4GHz Wi-Fi
  • 16M Flash, 8M PSRAM
  • Built-in ATECC608 hardware encryption chip
  • Capacitive touch screen
  • Built-in PDM microphone, power indicator, 6-Axis IMU, vibration motor, I2S codec, Amplifier, Speaker, RTC, power button, reset button, 10 x RGB LEDs
  • TF card slot (support up to 16GB)
  • Built-in 500mAh Lithium ion battery, equipped with power management chip
  • Validated through AWS Device Qualification Program
  • Compatible with multi-platform development:

Include

  • 1x M5Stack Core2
  • 1x M5GO Bottom2 for AWS
  • 1x Type-C USB (50cm)
  • 1x HEX KEY

Application

  • Internet of Things Controller
  • STEM Education
  • DIY projects

Specification

Resources Parameter
ESP32-D0WDQ6-V3 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
Flash 16MB
PSRAM 8MB
Hardware encryption chip ATECC608B-TNGTLSU-G (addr 0x35)
Input voltage 5V @ 500mA
Host interface TypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1
Programmable LED light SK6812*10
Button Power button, RST button, virtual screen button * 3
Vibration reminder Vibration motor
IPS LCD screen 2.0"@320*240 ILI9342C
Capacitive touch screen IC FT6336U
Speaker 1W-0928
Microphone SPM1423
I2S power amplifier NS4168
IMU MPU6886
RTC BM8563
PMU AXP192
USB chip CP2104
DC-DC boost SY7088
TF card slot Support up to 16G
Lithium battery 500mAh @ 3.7V
Antenna 2.4G 3D antenna
Working temperature 32°F to 104°F (0°C to 40°C )
Net weight 101g
Gross weight 108g
Product size 54 x 54 x 24mm
Package size 90 x 60 x 27mm
Shell material Plastic (PC )

Driver Installation

Click the link below to download the driver that matches the operating system. There are currently two driver chip versions, CP210X (for CP2104 version)/CP34X (for CH9102 version) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. (If you are not sure of the USB chip used by your device, you can install both drivers at the same time. During the installation process of CH9102_VCP_SER_MacOS v1.7, an error may occur, but the installation is actually completed, just ignore it.) When using it, if If the program cannot be downloaded normally (the prompt is overtime or Failed to write to target RAM), you can try to reinstall the device driver.
Driver name Applicable driver chip Download link
CP210x_VCP_Windows CP2104 Download
CP210x_VCP_MacOS CP2104 Download
CP210x_VCP_Linux CP2104 Download
CH9102_VCP_SER_Windows CH9102 Download
CH9102_VCP_SER_MacOS v1.7 CH9102 Download

EasyLoader

EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.

Download Windows Version Easyloader

Description:
Core2 for AWS factory default example.

PinMap

LCD & TF card

LCD :320x240 TF card Maximum size 16GB

ESP32 Chip GPIO38 GPIO23 GPIO18 GPIO5 GPIO15
AXP192 Chip AXP_IO4 AXP_DC3 AXP_LDO2
ILI9342C MISO MOSI SCK CS DC RST BL PWR
ESP32 Chip GPIO38 GPIO23 GPIO18 GPIO4
TF Card MISO MOSI SCK CS

CAP.TOUCH (I2C Addr: 0x38)

ESP32 chip GPIO21 GPIO22 GPIO39
AXP192
FT6336U SDA SCL INT

Mic & NS4168

ESP32 Chip GPIO12 GPIO0 GPIO2 AXP_IO2 GPIO34
NS4168 BCLK LRCK DATA SPK_EN
SPM1423 CLK DATA

AXP Power Indicator Light

AXP192 AXP_IO1 AXP_LDO3
Green LED Vcc /
Vibration motor Vcc

RTC

ESP32 Chip GPIO21 GPIO22
AXP192 AXP_PWR
BM8563 SDA SCL INT

IMU(3-axis gyroscope & 3-axis accelerometer) &Pogo Pin

ESP32 Chip GPIO21 GPIO22
MPU6886 SDA SCL
Pogo Pin SDA SCL

USB to serial chip

ESP32 Chip GPIO1 GPIO3
CP2104 RXD TXD

PSRAM

ESP32 Chip GPIO8 GPIO7 GPIO10 GPIO9 GPIO17 GPIO16
ESP-PSRAM64H SI/SIO0 SO/SIO1 SIO2 SIO3 SCLK CS#

SK6812-LED

ESP32 Chip GPIO25
SK6812-LED DATA

Internal I2C connection

ESP32 Chip GPIO21 GPIO22
MPU6886 SDA SCL
AXP192 SDA SCL
BM8563 SDA SCL
FT6336U SDA SCL
ATECC608 SDA SCL

Charging current measured value

charging current Fully charged current(Power OFF) Fully charged current(Power ON)
0.219A 0.055A 0.147A

M5Core2 M-BUS Schematic diagram

M5Core2 PORT

HY2.0-4P-PortA(Red)

ESP32 Chip GPIO32 GPIO33
PortA GPIO32(SDA) GPIO33(SCL)

M5GO-Bottom For AWS PORT

HY2.0-4P-PortB(black)

ESP32 Chip GPIO26 GPIO36
PortB GPIO26(DAC) GPIO36(ADC)

HY2.0-4P-PortC(blue)

ESP32 Chip GPIO13 GPIO14
PortC GPIO13(RXD2) GPIO14(TXD2)

ESP32 ADC/DAC

ADC1 ADC2 DAC1 DAC2
8 channels 10 channels 2 channels 2 channels
G32-39 G0/2/4/12-15/25-27 G25 G26

For more information about Pin assignment and Pin Remapping, Please refer to ESP32 Datasheet

Schematic

Example

Arduino

Tutorial

Module Size

module size

Video

Version Change

Release Date Product Change Note:
2023.27 Cancel RTC coin cell batteries Does not affect the timing function