Current Product Don't Have Test Firmware
Note: pls, use PC chrome/edge browser, if can't connect, refresh the webpage.
1. Click connect button
2. After connected successfully, pick a firmware
3. Click the burn button
4. After burning successfully, Unplug the device and restart.
Choose the development platform you want to use, view the corresponding tutorial&quick-Start.
M5Paper v1.1 is M5Stacks latest core device with a touch enabled E-ink display. Powered by the ESP32-D0WDQ6-V3 this is our first device to integrate a super sized 540*960 @4.7" E-ink display,which supports 16 grayscale levels. The display is a GT911 capacitive touch screen,which supports two point touch and a variety of gesture controls . Compared to a regular LCD,E-ink displays are easier on the eyes, which makes them a great choice for reading or viewing for longer periods. Other benefits are the low power consumption and the ability to retain the image even if power to the display is terminated. Integrated in the CoreInk are an multi-function button for operation, SHT30 temperature and moisture sensor, physical buttons and an TF-card(microSD) port for data storage.
Additionally the FM24C02 internal eeprom chip provided 2K-bit(256x8)-EEPROM can be used to store vital data even when the device is off. A 1150mAh lipo battery keeps the device going for long periods and battery life can be further preserved by using the RTC(BM8563)to set the device into deep sleep and wake it up again when needed。Three HY2.0-4P expansion ports are included which allow for building complex projects using the existing sensors in the M5Stack ecosystem.
M5Paper v1.1 adopts flexible e-Ink screen panel, which is the same model as that of M5Paper v1.0 hard e-Ink screen panel. All features and specs are the same for both models.
Warning: Do not expose to ultraviolet rays for a long time, otherwise it may cause irreversible damage to the E-ink screen. The low-power power management solution adopted by M5Paper is different from that of CORE and StickC devices. When in use, the PWR button is used as a power-on button(long press 2s). If you need to shut down the device, you need to use the software API or press the reset button on the back, when using USB power supply, it cannot be shut down.
|Hard display panel||Flexible display panel|
|ESP32-D0WDQ6-V3||240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth|
|Input Voltage||5V @ 500mA|
|Ports||TypeC*1, HY2.0-4P*3 , TF-card(microSD) slot|
|E-Ink Display||Model Number：EPD_ED047TC1 | firstname.lastname@example.org" | Grayscale : 16 Levels | Display area : 58.32*103.68mm | Display Driver : IT8951E|
|Physical Button||Multi-function button*1 , Reset Button*1|
|Antenna||2.4G 3D Antenna|
|PINS||G25, G32, G26, G33, G18, G19|
|Working Temp||0°C to 60°C|
|Casing Material||Plastic ( PC )|
E-INK & TF-card(microSD)
Multi-function button & PWR
Internal I2C Connection
|8 Channel||10 Channel||2 Channel||2 Channel|
For more info on specific pin functions refer to the official ESP32 Docs ESP32 datasheet
When using FactoryTest to load special characters (such as Chinese, Japanese), please put the font file into the TF card root directory and name it as
download ttf file