CoreInk Proto Base

SKU:M037

Description

CoreInk Proto Base is a DIY expansion kit suitable for CoreInk master control. When stacking the expansion board, the IO bus on the CoreInk main control will be led out to the PROTO board through the lower PIN pin. You can design and build the circuit according to your own needs. The package also contains a variety of expansion parts (HY2.0-4P female terminal, 3.96 male/female terminal, DC power terminal, etc.), which can be soldered to the PROTO board, which can add standard specifications to your circuit design. Output Interface. The hook hole on the back and the LEGO compatible hole design on the corners make it easy for you to embed the finished DIY product into a variety of structures.

Product Features

  • Compatible with CoreInk
  • Prototype circuit design
  • PROTO board

Includes

  • 1x CoreInk Proto Base (face shell + bottom shell)
  • 1x HEX KEY
  • 3x HY2.0-4P socket terminals (red x1, blue x1, black x1)
  • 4x HT3.96R-4P pins
  • 4x HT3.96R-4P socket
  • 1x HT3.96R-2P pin
  • 1x HT3.96R-2P socket
  • 1x DC-044 socket terminal
  • 4x M2*6 cup head tapping screws
  • 1x PROTO DIP header
  • 3x port block

Application

  • Experimental circuit
  • DIY function expansion

Specifications

Specifications Parameters
Net weight 34g
Gross weight 46g
Product size 56*40*16mm
Package size 83*54*26mm
Shell material Plastic (PC )

Pin mapping

  • The IO bus on the CoreInk main control will be led out to the PROTO board through the PIN pin
CoreInk GPIO ADC SCL SDA MOSI MISO SCK TXD2 RXD2 GND 5V IN 5V OUT 3.3V BAT RST
CoreInk G25,26 G36 G22 G21 G23 G34 G18 G14 G13 GND 5V IN 5V OUT 3.3V BAT RST

Video

Integrate 433MHz radio frequency module through CoreInk PROTO BASE welding to realize intelligent furniture control.