Current Product Don't Have Test Firmware
Note: pls, use PC chrome/edge browser, if can't connect, refresh the webpage.
1. Click connect button
2. After connected successfully, pick a firmware
3. Click the burn button
4. After burning successfully, Unplug the device and restart.
DualKmeter module13.2 is a dual-channel K-type temperature measurement module based on the
MAX31855KASA+stm32f030f4p6+galvanic isolation. The module has a built-in
two-way K-type thermocouple sensor interface, which uses the signal
relay to measure the temperature value of the two channels in turn, supporting a measurement range of
-200°C to 1350°C, and a measurement accuracy of ±2°C. At the same time, the module also has built-in voltage and signal isolation chips such as
B0505LS-1WR2 and CA-IS3020S, ensuring the 'stability and safety' of the system. In addition, the module has a built-in
dial code on off, which can easily switch different I2C addresses to meet the different application needs of users. It can be applied to multiple scenarios such as
industrial automation and instrument detection.
|MCU||STM32F030F4P6, a 32-bit microcontroller based on the Cortex-M0 core, 64KB Flash memory and 8KB SRAM|
|Digital temperature sensor||MAX31855KASA+T|
|Measure the temperature||-270°C至+1800°C|
|Module operating temperature||0-40°C|