Module Gateway H2
SKU: M141
Description
The Module Gateway H2 is a stackable gateway development module based on the ESP32-H2-MINI-1 module, specifically designed for the M5 series hosts. It features a low-power, RISC-V-based 32-bit single-core MCU and supports ZigBee, Thread, and the Thread-based Matter interconnect protocol. The module integrates IEEE 802.15.4 wireless communication capabilities, enabling it to work with M5 hosts to build Matter over Thread end devices, facilitating interoperability across multiple ecosystems.
Additionally, the Module Gateway H2 includes a hardware encryption engine, meeting the data security requirements of high-demand IoT applications. The module is equipped with a DIP switch, allowing users to flexibly switch communication interface modes, and it also provides a standard program download interface for easy firmware burning and debugging. It supports multi-module stacking expansion, making it suitable for applications such as smart homes, environmental monitoring, sensor networks, and low-power wireless communication nodes, helping developers quickly prototype and develop products.
Features
- Support for wireless communication protocols such as Zigbee, Thread, and Matter
- Integrated IEEE 802.15.4 technology
- DIP switch configuration
- Hardware encryption support
- Stackable expansion
- Low power consumption
- Development platforms:
- Arduino IDE
- ESP-IDF
Includes
- 1 x Module Gateway H2
Applications
- Smart home
- Industrial automation
- Healthcare
- Consumer electronics
- Smart agriculture
Specifications
| Specification | Parameters |
|---|---|
| SoC | Built-in ESP32-H2 chip, RISC-V 32-bit single-core processor, up to 96 MHz @IEEE 802.15.4 |
| Flash | 2MB |
| Antenna | Onboard PCB antenna |
| Supported Protocols | IEEE 802.15.4 (including Zigbee 3.0, Thread 1.3, Matter) |
| Power Consumption | Standby current: DC3.3V/8.55mA Operating current: Thread networking: DC3.3V/18.35mA |
| DIP Switch | 8-bit DIP switch for interface switching (UART/SPI) and wireless function control |
| Operating Temperature | 0-40°C |
| Product Dimensions | 54.0 x 54.0 x 13.1mm |
| Product Weight | 11.8g |
| Package Dimensions | 133.0 x 95.0 x 16.0mm |
| Package Weight | 25.1g |
Learn
Downloading Programs
Use the ESP32 Downloader to download programs to the ESP32-H2.
Certifications
- RCM/TELEC/CE/FCC/IC/BQB certifications
Schematics
PinMap
DIP Switch
| Module Gateway H2 | WL_ACTIVE | BT_ACTIVE | BT_PRIORITY | SPI_CS | SPI_MOSI | SPI_CLK | SPI_MISO |
|---|---|---|---|---|---|---|---|
| Basic | GPIO0 | GPIO12 | GPIO25 | GPIO15 | GPIO23 | GPIO18 | GPIO19 |
| Core2 | GPIO0 | GPIO27 | GPIO25 | GPIO2 | GPIO23 | GPIO18 | GPIO38 |
| CoreS3 | GPIO0 | GPIO6 | GPIO5 | GPIO13 | GPIO37 | GPIO36 | GPIO35 |
UART Communication with Host
| Module Gateway H2 | TX0 | RX0 | H2-EN | G9 |
|---|---|---|---|---|
| Basic | GPIO35 | GPIO17 | GPIO13 | GPIO16 |
| Core2 | GPIO35 | GPIO14 | GPIO19 | GPIO13 |
| CoreS3 | GPIO10 | GPIO17 | GPIO7 | GPIO18 |
Model Size
Datasheets
Softwares
Arduino
ESP-IDF
- ESP Thread Border Router Guide
- ESP Zigbee Gateway Guide
- ESP Zigbee NCP Guide
- ESP32-H2 ESP-IDF Docs
- ESP Zigbee SDK
- ESP Thread Border Router SDK
Video
- Module Gateway H2 Product Introduction and Case Demonstration