ECG Module13.2 (AD8232)

SKU:M034

Description

ECG is a heart rate monitor (electrocardiogram) unit,it can detect the heart rate and output a cardiogram signal. Electrocardiogram (ECG) is a technology that uses an electrocardiograph to record the changes in the electrical activity of the heart during each cardiac cycle.

At the signal acquisition end, this ECG module integrates the AD8232 single-lead heart rate monitoring at the front end, the collected ECG signal is processed by the AD8603 low-pass filter, and the 10bit-ADC (AD7476) performs analog/digital signal input to STM32 (built-in heart rate statistics) Algorithm) for signal analysis.

Finally, the processing results are output in the form of serial communication to facilitate the acquisition and display of the main control device. In terms of signal output, it adopts front-end/digital full isolation design to enhance equipment stability and safety.

Caution: This product only allows the use of 5V power input. Please strictly abide by the power input standard when using this product to avoid damage to the equipment or injury.

Product Features

  • ADI front end integration (high signal gain G=100, with DC blocking capability)
  • Serial Data input
  • Heart Rate Statistics monitoring
  • Front end/digital fully isolated design
  • Ultra Precision Op Amp

Include

  • 1x ECG Module
  • 3x ECG electrodes
  • 6x Adhesive Pads

Applications

  • Bioelectric signal acquisition
  • Portable ECG
  • Exercise Tracker

Specification

Resources Parameter
Communication Method UART 115200bps
AD8232 High signal gain G=100 | With DC blocking capability | Common mode rejection ratio: 80 dB (DC to 60 Hz)
AD7476 10bit-ADC | SPI Interface | Fast throughput rate: 1 MSPS | vref 2.8v
Net weight 18g
Gross weight 101g
Product Dimension 54*54*13.2mm
Package Dimension 105*65*40mm

EasyLoader

EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.

Download Windows Version Easyloader

Download MacOS Version Easyloader

Description:
Statistic heart rate, display ECG curve

Pin Map

M5Stack TX/G13 RX/G5 5V GND
ECG RX TX VIN GND

Schematic

When using the PC-side heart rate reading tool, the device needs to burn the serial port transparent transmission firmware(Before uploading, please change the serial port initialization pin to the actually connected pin) and forward the data to the PC.

Example

Arduino

Download Arduino Code