STEPMOTOR is used for stepper motor control. It is perfect for any motion project as it can drive up to 3 Stepper motors with GRBL control.
It is built with MEGA328P has been flashed GRBL firmware. The module comunicates with M5Core via I2C(0x70)
Integrated 3 DRV8825, a simple but very powerful board that can control one bipolar stepper motor at the time and allows micro stepping up to 1/32 of a step.
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed.
2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click "Burn" to start burning.
3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. Click here to view the driver installation tutorial
Mega328 ISPDownload interface Pin foot definition
The code below is incomplete. TO get complete code, please click here
Wanna explore the easiest way of Servo programming?? Check out the Blockly Platform at UIFlow
To get complete code, please click here