SKU:K130-V11




















Dial v1.1 is a high-performance, multifunctional embedded development board that has been fully upgraded from the original Dial product. The new version features the Stamp-S3A as the main controller, further enhancing system processing power and stability. Additionally, the core module antenna and buttons have been optimized to effectively improve wireless communication performance and user interaction experience. The product is equipped with a 1.28-inch round TFT touch screen and a high-precision rotary encoder, and includes an RFID detection module, RTC circuit, onboard buzzer, and under-screen buttons to enable device interaction and wake-up alerts. The power supply solution supports DC 6~36V wide voltage input and includes a lithium battery interface and charging circuit to meet diverse application needs. Furthermore, the reserved PORT.A and PORT.B interfaces facilitate the expansion of I2C and GPIO devices. This product is applicable in smart home control, IoT applications, smart wearables, access control systems, industrial control, and educational maker projects.
| Specification | Parameter |
|---|---|
| SoC | ESP32-S3FN8 @ Xtensa® 32-bit LX7 dual-core processor, clock frequency 240MHz |
| USB | USB OTG, USB Serial/JTAG |
| Flash | 8MB |
| Wi-Fi | 2.4 GHz Wi-Fi |
| Wide Voltage Input Range | DC 6 ~ 36V |
| Screen Driver | GC9A01 1.28 Inch 240 x 240px |
| Touch Driver | FT3267 |
| RFID | WS1850S @ Tag operating frequency: 13.56 MHz, ISO/IEC 14443 Type A/Type B protocol |
| Encoder | Resolution: 16 positions, 64 pulses/rev |
| Buzzer | 80dB |
| Battery Socket Specification | MX1.25-2P |
| Sleep Current | USB supply: DC 5V@6.84mA (LDO idle power consumption) Battery only: DC 4V@6uA |
| Operating Current | USB supply: DC 5V@88.19mA Battery only: DC 4V@100mA |
| Power Interface Specification | Model KF2EDGV-2.54-2P, straight pin design, 2.54mm pitch (2Pin), green |
| Operating Temperature | 0 ~ 40°C |
| Product Size | 51.0 x 51.0 x 32.3mm |
| Product Weight | 46.2g |
| Package Size | 71.9 x 71.9 x 57.4mm |
| Gross Weight | 61.0g |
WAKE button or wake it via an IRQ signal triggered by the RTC timer. After the wake-up signal is triggered, set the HOLD (GPIO46) pin to high (1) in the program initialization to maintain power; otherwise, the device will return to sleep.RST button;
(2) Set HOLD (GPIO46) to 0 during program execution to cut off battery power.With the device powered off, press and hold the G0 button on the Stamp-S3A while connecting the device to a computer via a USB Type-C data cable. Release the button after the device is powered on; the device enters download mode.
If the size of the RFID tag is smaller than the outer dimensions of the Dial, it may not be recognized or may cause communication errors. It is recommended to use an RFID card in the standard bank card size.




| ESP32-S3 | G12 | G11 | G8 | G10 | G3 |
|---|---|---|---|---|---|
| RTC8563 | SCL | SDA | |||
| WS1850S(RFID) | SCL | SDA | RST | IRQ | |
| Buzzer | beep |
| ESP32-S3 | G40 | G41 | VCC | GND |
|---|---|---|---|---|
| ENCODER | B | A | 5V | GND |
| ESP32-S3 | G4 | G5 | G6 | G7 | G8 | G9 | G11 | G12 | G14 |
|---|---|---|---|---|---|---|---|---|---|
| GC9A01 | LCD_RS | LCD_MOSI | LCD_SCK | LCD_CS | LCD_RESET | LCD_BL | |||
| FT3267 | TP_SDA | TP_SCL | TP_INT |
| HY2.0-4P | Black | Red | Yellow | White |
|---|---|---|---|---|
| PORT.A | GND | 5V | G13 | G15 |
| PORT.B | GND | 5V | G2 | G1 |
| Easyloader | Download Link | Notes |
|---|---|---|
| Dial v1.1 User Demo Easyloader | download | / |
| Dial v1.1 Knob Panel Demo Easyloader | download | / |
| Comparison Item | Dial v1.1![]() | Dial![]() |
|---|---|---|
| Core Module | Stamp-S3A | StampS3 |
| Antenna Design | Optimized design, stronger signal | Standard design |
| Stamp-S3A module Boot button | Optimized button feel, buttons use 4.0 x 3.0 x 2.0mm specs | Button specs 2.6 x 1.6 x 0.55mm |
| Power Consumption | Optimized for lower power consumption | Standard design |