RS485 is a TTL to RS485 convertor.
RS485 is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems, widely used in industrial field. multipoint systems are supported.
It's used to convert the TTL standard to the RS485 standard. If the outside serial device is RS485 standard, you can attach this unit onto M5stack, therefore, to implement the communication with RS485 device by TTL protocol.
- Built in MAX485/SP485EEN
- input DC 12V
- Program Platform: Arduino, UIFlow (Blockly, Python)
- Two Lego-compatible holes
- 1x RS485 Unit
- 1x Grove Cable
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed. .
- After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click "Burn" to start burning. (For M5StickC burning, please Set the baud rate to 750000 or 115200)
- Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller)
Click here to view the driver installation tutorial
|RS485 Unit||RS485 RXD||RS485 TXD||5V||GND|
AI camera that automatically sorting out the garbage.
Last updated: 2020-12-14