Demo Board

SKU:K024

Tutorial&Quick-Start

Tutorial&PDF

Description

Demo Board. This is a feast of IoT stuff, powered by M5Stack. It is an all-in-one Learning board powered by ESP32, which includes anything you can imagine in an IoT + industrial application scenarios. Let's see what you can do with it: Robotic movement, the most commonly used serial communication port(RS485 RS232), Relay control, all different types of Button control, RF reader, speaker, Microphone and more all able to develope by an M5stack core device, so you can program this board with Blockly(UIFlow), Arduino, and Micropython. Based on application scenarios, we've partitioned them into different functional parts with the good-looking layout and full-function performance. Here comes the most powerful IIoT learning board.

Product Features

  • Fully Compatible with the M5Stack stackable and extendable system
  • Protoboard, M5-BUS extension
  • Each module comes with an individual power switch.
  • Environment Sensor set ( Temperature, Humility, barometric pressure, light intensity, and Microphone )
  • Joystick Controller
  • 8 Channel of Realy output
  • 4x DAC,4x ADC
  • 4x4 button matrix
  • 8x8 RGB LED matrix
  • Encoder
  • 1x Servo
  • DC-Motor(with feedback encoder)
  • step motor with four-phase five-wire
  • Radio frequency identification Reader
  • RS-485,RS232 series communication

Include

  • 1x Demo Board learning board
  • 1x Power Aapter
  • 1x RS232 cable
  • 1x RFID Card
  • 1x ID Card
  • 16x breadboard cable

Applications

  • IOT teaching experiment board
  • Multi function test board

Specification

Resources Parameter
Net weight 1120g
Gross weight 1120g
Product Size 330*210*95mm
Package Size 330*210*95mm
## EasyLoader

download EasyLoader

1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed.

2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click "Burn" to start burning.

3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. Click here to view the driver installation tutorial

Module parameters

Module Name working Voltage Patameter
ADC 5V 4x ADC port/ADS1115
DAC 5V 4x DAC port/DAC6574
Joystick 3.3V axis-X/Y potentiometer input, axis-Z button input
DHT12 3.3V I2C address 0x5C
BMP280 3.3V I2C address 0x76
Light 3.3V A/D sampling supported, adjustable threshold
Microphone 3.3V A/D sampling supported, adjustable threshold
Relay 5V 8 channels /3A-220V-AC/3A-30V-DC
RGB LED 5V 8x8 LED matrix
Servo 5V 10KG torsion
DC-Motor 5V feedback encoder/LV8548MC
Stepmotor 5V 4-phase 5 wires LV8548MC
RFID 3.3V Read & Write distance: < 8 cm/ MFRC522
RS485 5V SP485EEN-L/TR
RS232 5V MAX232ESE
Encode Encoder button
Proto 170x holes
Keyboard 4x4 button matrix

Datasheet

Schematic

Example

Arduino