M5GO IoT Kit

SKU: K006

Description

The M5GO IoT Kit is a development kit from the M5Stack series designed for STEM education. In addition to the main M5GO unit, the kit includes 6 different functional Units and some LEGO bricks and other accessories. M5GO not only has rich hardware resources but also comes with a wealth of educational videos, textbooks, technical documents, and other materials. It plays an important role in STEM education for students of all ages.

The kit provides an online version of the WebIDE UIFlow programming platform, allowing students to experience the power of IoT through network-based program deployment. It also supports multiple programming methods, helping students gradually transition from graphical programming to understanding actual code.

As a kit specifically designed for STEM education, M5GO aims to make learning fun while helping students gain a sense of accomplishment by turning their creative ideas into reality. It allows students to freely explore the world of engineering, create their own IoT products, and integrate their brilliant ideas into real life.

Tutorial

Choose the development platform you want to use and view the corresponding tutorials & quick start guides.

UIFlow

This tutorial will introduce you to how to control the M5GO device using the UIFlow graphical programming platform.

UiFlow2

This tutorial will introduce you to how to control the M5GO device using the UiFlow2 graphical programming platform.

Arduino IDE

This tutorial will introduce you to how to control the M5GO device using the Arduino IDE.

Features

Based on ESP32 development
Integrated 3-axis magnetometer, 3-axis gyroscope, and 3-axis accelerometer
Built-in speaker, buttons, LCD screen, power/reset buttons
TF card slot (expandable up to 16GB)
Expandable pins and interfaces
M-Bus socket
Built-in battery
Magnetic charging design on the back
Development Platform
- UiFlow1
- UiFlow2
- Arduino IDE
- ESP-IDF
- PlatformIO

Includes

1 x M5GO
6 x Units (ENV II, IR, RGB, PIR, ANGLE, HUB)
4 x LEGO bricks
12 x LEGO connectors
4 x GROVE cables
1 x USB Type-C cable (20cm)
1 x M2*12 machine screw
2 x M3*16 machine screws
1 x 1.5mm hex key
1 x User manual

Applications

IoT controller
STEM education
DIY projects
Smart home devices

Specifications

Main Resources	Parameters
ESP32	240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
Flash Memory	16MB Flash
Input Voltage	5V @ 500mA
Host Interface	TypeC x 1, GROVE (I2C+I/O+UART) x 1
IPS Screen	2 inch, 320x240 Colorful TFT LCD, ILI9342C, max brightness 853nit
Buttons	Custom buttons x 3
Speaker	1W-0928
Microphone	MEMS Analog BSE3729 Microphone
LED	SK6812 3535 RGB LED x 10
MEMS	BMM150 + MPU6886
Battery	500 mAh @ 3.7V, inside vb
Antenna	2.4G 3D antenna
Operating Temperature	0 ~ 60°C
Net Weight	56.4g
Gross Weight	228g
Product Dimensions	54 x 54 x 21 mm
Package Dimensions	147 x 90 x 40 mm
Shell Material	Plastic (PC)

Learn

Power On/Off

Power On/Off Operations

Power On: Click the red power button on the left
Power Off: Quickly double-click the red power button on the left
USB Power Supply: By default, the device cannot be powered off when connected to USB power.

Schematics

M5Core Schematics PDF

1/6

PinMap

LCD Screen & TF Card

LCD Resolution: 320x240 TF Card supports up to 16GB

ESP32 Chip	GPIO23	GPIO19	GPIO18	GPIO14	GPIO27	GPIO33	GPIO32	GPIO4
ILI9342C	MOSI/MISO	/	CLK	CS	DC	RST	BL
TF Card	MOSI	MISO	CLK					CS

Buttons & Speaker

ESP32 Chip	GPIO39	GPIO38	GPIO37	GPIO25
Button Pins	BUTTON A	BUTTON B	BUTTON C
Speaker				Speaker Pin

GROVE Interface A & IP5306

The power management chip (IP5306) is a custom I2C version with an I2C address of 0x75. Click here to view the IP5306 register manual.

ESP32 Chip	GPIO22	GPIO21	5V	GND
GROVE A	SCL	SDA	5V	GND
IP5306	SCL	SDA	5V	GND

IP5306 Charge/Discharge Voltage Parameters

Charge	Discharge
0.00 ~ 3.40V -> 0%	4.20 ~ 4.07V -> 100%
3.40 ~ 3.61V -> 25%	4.07 ~ 3.81V -> 75%
3.61 ~ 3.88V -> 50%	3.81 ~ 3.55V -> 50%
3.88 ~ 4.12V -> 75%	3.55 ~ 3.33V -> 25%
4.12 ~ / -> 100%	3.33 ~ 0.00V -> 0%

MPU6886 Gyroscope Accelerometer

MPU6886 I2C address 0x68

ESP32 Chip	GPIO22	GPIO21	5V	GND
MPU6886	SCL	SDA	5V	GND

BMM150 3-Axis Magnetometer

BMM150 I2C address 0x10

ESP32 Chip	GPIO22	GPIO21	5V	GND
BMM150	SCL	SDA	5V	GND

M5GO Base Pins

LED Strip & Microphone MIC

ESP32 Chip	GPIO15	GPIO34	GPIO25
LED Strip	SIG Pin
Microphone MIC		MIC Pin

ESP32 ADC/DAC

ADC1	ADC2	DAC1	DAC2
8 Channels	10 Channels	2 Channels	2 Channels
G32-39	G0/2/4/12-15/25-27	G25	G26

HY2.0-4P

HY2.0-4P	Black	Red	Yellow	White
PORT.A	GND	5V	G21	G22
PORT.B	GND	5V	G26	G36
PORT.C	GND	5V	G16	G17

M-BUS

When using GPIO15 for RGB LED, it is recommended to initialize the pin with pinMode(15, OUTPUT_OPEN_DRAIN); For more information on pin allocation and pin remapping, please refer to the ESP32 datasheet

Datasheets

Datasheet
- ESP32
- ILI9342C
- MPU6886
- BMM150
- IP5306

Softwares

Arduino

Click here to view Arduino examples
Arduino API

UiFlow1

M5GO UiFlow1 Quick Start

UiFlow2

M5GO UiFlow2 Quick Start

USB Driver

Click the links below to download the drivers for your operating system. There are currently two versions of driver chips: CP210X (for CP2104 version) / CP34X (for CH9102 version) driver packages. After extracting the package, select the installation package that matches your operating system's bit version. (If you are unsure which USB chip your device uses, you can install both drivers. CH9102_VCP_SER_MacOS v1.7 may report an error during installation, but it is actually installed successfully, so you can ignore the error.)

Driver Name	Applicable Driver Chip	Download Link
CP210x_VCP_Windows	CP2104	Download
CP210x_VCP_MacOS	CP2104	Download
CP210x_VCP_Linux	CP2104	Download
CH9102_VCP_SER_Windows	CH9102	Download
CH9102_VCP_SER_MacOS v1.7	CH9102	Download

MacOS Port Selection

In MacOS, there may be two optional ports. Please select the port named wchmodem when using.

Easyloader

EasyLoader is a simple and fast program flasher that comes with a product-related demo program. By following simple steps to flash it to the main controller, you can perform a series of functional verifications.

Easyloader	Download Link	Notes
M5GO IoT Kit User Demo Easyloader	download	/

Video

Case Description:
Load UIFlow firmware, the built-in demo program supports accelerometer, LED BAR, microphone, buttons, and some peripheral sensor tests. The firmware can be used for UIFlow graphical programming.

Version Change

上市日期	产品变动	备注：
2018.4	首次发售	/
2019.6	MPU9250变更为MPU6886+BMM150	/
2019.7	TN屏幕变更为IPS屏幕	请将您的M5Stack库升级到最新版本(v0.2.8以上)，以解决屏幕反色问题。
2019.11	电池容量600mAh变更为500mAh	/
2020.6	套件内ENV Unit更改为ENV II	/

注意：2018.2APCB 版本的设备不支持 C2C(TypeC to TypeC)连接及 PD 供电。