Current Product Don't Have Test Firmware
Note: pls, use PC chrome/edge browser, if can't connect, refresh the webpage.
1. Click connect button
2. After connected successfully, pick a firmware
3. Click the burn button
4. After burning successfully, Unplug the device and restart.
STAMP-PICO features an ultra-compact design with two low-power
Xtensa® 32-bit LX6 microprocessors at
240MHz on a PCB as tiny and delicate as a postage stamp. low power consumption.
It is ideal for any space-constrained or battery-powered devices such as wearables, medical devices, sensors, and other
MULTIFORM: 5 options of installation, means endless possibilities! (SMT, DIP, flywire, grove interface), with a high-temperature resistant plastic shell, 3D antenna and components can be better protected.
LOW-CODE DEVELOPMENT: STAMP-PICO supports UIFlow graphical programming platform, scripting-free, cloud push; and fully compatible with Arduino, MicroPython, ESP32-IDF, and other mainstream development platforms to quickly build various applications.
HIGH INTEGRATION: STAMP-PICO contains 5V->3.3V DC/DC port, GPIOx12, programmable RGB light x1, button x1, finely tuned RF circuit, providing stable and reliable wireless communication.
STRONG EXPANDABILITY: Easy access to M5Stack's hardware and software ecology system: a wealth of sensors, actuators, functional modules, and accessories to choose from, Extremely fast adaptation.
|Master Control Resource||ESP32-PICO-D4|
|Input Voltage||5V @ 500mA|
|Power consumption||Normal standby:5V@29mA, WIFI STA mode: 5V@60mA, Bluetooth mode data sending status: 5V@84mA, Deep-sleep mode: 5V@0.35mA|
|Wireless communication distance||AP Mode: 16m, BLE Mode: 110m, Class Bluetooth Mode: 90m|
|UI||Programmable physical keys x 1, Programmable RGB LED (SK6812) x 1|
|Antenna Type||2.4G 3D Antenna|
|Wi-Fi||802.11 b/g/n (up to 150 Mbps for 802.11n), spectrum range: 2.4 GHz ~ 2.5 GHz|
|Bluetooth||Blutooth V4.2 BR/EDR and BLE standard, NZIF receiver, sensitivity up to -97 dBm|
|Module Resource Interface||ADC, DAC, touch sensor, SD/SDIO/MMC host controller, SPI, SDIO/SPI slave controller, EMAC, motor PWM, LED PWM, UART, I2C, I2S, IR remote controller, GPIO, pulse counter|
|IO interface x12||G0, G1, G3, G26, G36, G18, G19, G21, G22, G25, G32, G33|
|IO interface spacing||2.54mm|
|perating temperature||0°C to 60°C|
|M5Stamp Pico (5pcs) Gross weight||18g|
|M5Stamp Pico Mate Gross weight||6g|
|M5Stamp Pico DIY Kit Gross weight||12g|
|Product Dimensions||18 * 24 * 4.6mm|
|Package Size||85*55mm sealing bag (translucent)|
Before burning, you need to connect a USB-TTL burning board for STAMP-PIOC, and proceed according to the board silkscreen connect. Install the driver corresponding to the burning board on the PC.
The most convenient way is to
Purchase the STAMP-PICO package version with downloader
, the line sequence of the matching downloader It is consistent with STAMP-PICO, it can be directly plugged in for programming without wiring. Currently M5 provides downloaders of two driver chip versions, CP210X (applicable to
CP2104 version)/CP34X (applicable to
CH9102 version) driver compressed package. After decompressing the compressed package, select the installation corresponding to the number of operating systems Package to install. (If you are not sure which USB chip your device uses, you can install two drivers at the same time)
|Driver name||Applicable driver chip||Download link|
SK6812 (RGB LED) and Button