Stamp-Pico Mate
SKU:K051
Description
Stamp-Pico Mate is an accessory kit for the Stamp-Pico minimum core board. The kit comes with the Stamp-Pico, as well as practical accessories such as female headers, male headers, and an HY2.0-4P female socket. This allows you to very conveniently and quickly integrate the Stamp-Pico into your circuit.
The Stamp-Pico is a high-cost-performance Wi-Fi minimum core board. This module uses the ESP32 main control chip. The chip is equipped with 2 low-power Xtensa® 32-bit LX6 microprocessors, and its main frequency can reach up to 240 MHz.
The Stamp-Pico features a small and compact size and excellent performance. It can be easily embedded into your application circuit to build IoT applications.
Tutorial
Features
- ESP32-PICO-D4 (2.4GHz Wi-Fi)
- Multiple IOs are led out, supporting various application forms (SMT (Surface Mount Technology), DIP (Dual In-line Package), and jumper wires).
- Integrated with a programmable RGB LED and a button.
- It is the minimum system board of ESP32.
- Equipped with high-temperature plastic armor to better protect the 3D antenna and components.
- Includes a 5V->3.3V DC/DC circuit, 12 GPIO (General Purpose Input/Output) pins, one programmable RGB light, and one button.
- The professionally tuned RF (Radio Frequency) circuit provides stable and reliable wireless communication quality.
Includes
- 1 x Stamp-Pico
- 1 x 2.54-9P Male Header
- 1 x 2.54-9P Female Header
- 1 x 2.54-6P Male Header
- 1 x 2.54-6P Female Header
- 1 x Heat Resistant Sticker
- 1 x HY2.0-4P Socket（90°）
- 1 x Hex Key L-Shape 1.5mm (For M2 Screw)
Applications
- DIY prototype production
- Industrial automation
- Smart home
Specifications
| Specification | Parameter |
|---|---|
| ESP32-PICO-D4 | Dual-core with a frequency of 240MHz, 600 DMIPS, 520KB SRAM, Wi-Fi package: LGA48 (7*7mm) |
| Flash | 4MB |
| Input Voltage | 5V @ 500mA |
| Power Consumption | Normal standby: 5V@29mA, In WIFI STA mode: 5V@60mA, In data transmission state under classic Bluetooth mode: 5V@84mA, In DeepSleep mode: 5V@0.35mA |
| Wireless Communication Distance | In AP mode: 16m, In BLE mode: 110m, In classic Bluetooth mode: 90m |
| Human-Machine Interaction | 1 programmable physical button, 1 programmable RGB LED (SK6812) |
| Antenna Type | 2.4G 3D antenna |
| Wi-Fi | 802.11 b/g/n (The speed of 802.11n can reach up to 150 Mbps), Frequency spectrum range: 2.4 GHz ~ 2.5 GHz |
| Peripheral Interface Resources of the Module | ADC, DAC, touch sensor, SD/SDIO/MMC host controller, SPI, SDIO/SPI slave controller, EMAC, motor PWM, LED PWM, UART, I2C, I2S, infrared remote controller, GPIO, pulse counter |
| IO Interfaces (x12) | G0, G1, G3, G26, G36, G18, G19, G21, G22, G25, G32, G33 |
| Spacing of IO Interfaces | 2.54mm |
| Operating Temperature | 0 ~ 60°C |
| Specification of Fixing Screws | M2 x 4 Countersunk Hex Socket Head Cap Screw with Machine Thread |
| Product Size | |
| Product Weight | |
| Packaging Size | |
| Gross Weight |
Learn
Downloading the Program
- The Stamp-Pico adopts the most streamlined circuit design, so it does not include a program download circuit. When using it, users can download the program through a USB-TTL programmer. The wiring method is shown in the figure below.
The shell supports the reflow soldering temperature curve.
Schematics
PinMap
SK6812，Button
| ESP32 | G27 | G39 |
|---|---|---|
| SK6812 | DI | / |
| Button | / | SW |
Model Size
PCB
Datasheets
Softwares
Arduino
USB Driver
Before performing the burning process, you need to connect a USB-TTL programming board to the Stamp-Pico and make the connections according to the silkscreen on the board. Install the corresponding driver for the programming board on the PC.
| Driver Name | Compatible Driver Chip | Download Link |
|---|---|---|
| CP210x_VCP_Windows | CP2104 | Download |
| CP210x_VCP_MacOS | CP2104 | Download |
| CP210x_VCP_Linux | CP2104 | Download |
| CH9102_VCP_SER_Windows | CH9102 | Download |
| CH9102_VCP_SER_MacOS v1.7 | CH9102 | Download |
Video
Product Comparison
