CAN (Controller Area Network) Unit

SKU:U085

Description

CAN Unit is an isolated controller area network (CAN) transceiver unit, which can be used to build a complex can communication network. The built-in DC-DC isolated power chip can isolate noise and interference and prevent damage to sensitive circuits.

The model of the isolated CAN transceiver is ca-is3050g, which can provide differential reception and differential transmission capabilities. The bus can support up to 110 nodes, and the signal transmission rate can reach 1Mbps. It has current limiting, over-voltage, grounding loss protection (– 40 V to 40 V) and thermal shutdown functions, which can prevent output short-circuit and meets the technical specifications of ISO11898-2 standard.

CAN is an ISO international standard serial communication protocol. CAN belongs to the field bus category. It is a kind of serial communication network which can effectively support distributed control or real-time control.

The distributed control system based on CAN bus adopts multi master competitive bus structure, which has the characteristics of multi master station operation, decentralized arbitration and broadcast communication.

It has some obvious advantages in the following aspects: High speed low failure rate data communication between nodes in the network. When multiple nodes initiate communication at the same time, the one with low priority will avoid the one with high priority, which will not cause congestion to the communication line. The communication distance can reach 10km (the rate is lower than 5Kbps) and the rate can reach 1Mbps (communication distance is less than 40m).

Product Features

  • Power light
  • Built-in isolated DC-DC
  • Signal rate up to 1Mbps
  • Protection function: signal isolation, current limiting, over-voltage protection and thermal shutdown
  • 2x LEGO compatible hole
  • HY2.0 4P Interface

Include

  • 1x CAN Unit
  • 1x HY2.0 Cable(5CM)
  • 1x VH3.96-4P
  • 1x 120R Resistor

Application

  • CAN bus communication
  • Industrial field control
  • Security system

Specification

Resources Parameter
Rated withstand voltage 1000V
Maximum rate 1Mbps
Number of theoretical nodes 110
Low loop delay -150ns
Common mode voltage -12V ~ 12V
Protection Function Current limiting, over voltage, main dynamic time-out function and signal isolation
Net Weight 12g
Gross Weight 25g
Product Size 65 x 24 x 8mm
Package Size 67 x 53 x 12mm
Case Material Plastic ( PC )

EasyLoader

EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.

Windows MacOS

Description:
Can data transceiver

Pin Map

M5Core(PORT C) GPIO16 GPIO17 5V GND
CAN Unit RXD TXD 5V GND

Schematic

Example

Arduino

CAN - Transceiver TEST

UIFlow

CAN - UIFlow Example