Current Product Don't Have Test Firmware
Note: pls, use PC chrome/edge browser, if can't connect, refresh the webpage.
1. Click connect button
2. After connected successfully, pick a firmware
3. Click the burn button
4. After burning successfully, Unplug the device and restart.
Hall effect Unit integrated with three A3144E Hall sensor switches which are processed by 74HC series gate integrated circuits.
Low-level signal can be generated when the magnet S pole is close to the top of the sensor or the N pole is close to the back, and the internal LED indicator will light up.
It is widely used in applications such as door sensor alarms, proximity sensors, rotation speed measurement and so on. The front side is the North pole, and the low level is output when the south pole signal of the magnetic field is sensed.
|Hall sensor||A3144E * 3|
|Status indication||RED LED|
|Output Level||Active Low|
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
The screen displays the state of magnetic induction, low-level effective
|M5Core (PORT B)||GPIO26||GPIO36||5V||GND|
|Hall effect Unit||INPUT||5V||GND|