PWM

PWM used to generate analog signals to drive servos or buzzers,etc.

ledcSetup()

Syntax:

void ledcSetup(uint8_t channel, double freq, uint8_t resolution_bits)

Description:Set the PWM channel, frequency and resolution.

ledcAttachPin()

Syntax:

void ledcAttachPin(uint8_t pin, uint8_t channel)

Description:Bind the LEDC channel to the specified IO port to achieve output.

ledWrite()

Syntax:

void ledcWrite(uint8_t channel, uint32_t duty)

Description:Output waveform to the channel channel according to the specified duty cycle.

Example:

#include <M5StickC.h>
int freq = 1800;
int channel = 0;
int resolution_bits = 8;
int buzzer = 2;

void setup() {
  M5.begin();
  ledcSetup(channel, freq, resolution_bits);
  ledcAttachPin(buzzer, channel);
}
void loop() {
    ledcWrite(channel, 128);
    delay(1000);
    ledcWrite(channel, 0);
    delay(1000);
}
On This Page