AC Socket
Description
This is an upgrade of a normal AC socket outlet, which empowers the user to customize the AC outlet through RS485 series. Serial communication control can include multiple AC sockets, have them serial connected in the same RS485 main bus, can be applied to a typical industrial application scenario. Let's break it down a little bit, start with the bottom part.
- The whole AC socket is consist of two parts. For people who are familiar with M5 industrial product series, would recognize the base at the bottom is BASE26. we put a 3pin inlet socket at one customizable side of BASE26. This is where we power the AC socket from.
Features
- RS485 OUTLET
- Serial communication protocol: ModBUS-RTU
- support Multiple device Series connection
- STM32F030F4
- Embedded 4x M3 Nut
- Build with BASE26
- INPUT : 100-240V
- OUTPUT: 10A
- Power Status indicator
Include
- 1x AC Socket
Applications
- Smart AC Socket Outlet With wire control of RS485
Specifications
| Resources | Parameter |
|---|---|
| Net weight | 120g |
| Gross weight | 158g |
| Product Size | 52*52*60mm |
| Package Size | 72*102*72mm |
- The top is where goes in the AC plug, and the relay control inside would switch on and off the power in here.
- To get more AC socket connected in series, we would use an HT3.96 terminal connectors, as you can see the orange socket in the picture.
- The bottom part is mainly in charge of converting the AC power 220V to DC 5V to power the microprocessor STM32F030F4 and RS485 related circuit. As you can see from the picture, two parts wire connected by M-Bus socket and a pair of power wire. A red led indication is placed on top.
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
Press B to turn on the power and a to turn off the power.
Example
Please click here to download Arduino code
ACSocket Modbus RTU protocol
Description:
-1. Communication adopts RS485, 1 start bit + 8 data bits + 1 end bit -2. The baud rate is 9600 -3. The Device ID defaults to AAH -4. Address 00H is the broadcast address, and there is no reply from the slave
Command: (Hexadecimal) (Modbus RTU format)
1. Write coil
Host sends:
AA 05 00 00 FF 00 95 E1 (closed coil)
AA 05 00 00 00 00 D4 11 (disconnect coil)
| Send content | Number of bytes | Send message | Remarks |
|---|---|---|---|
| Module address | 1 | AAH | 00H is the broadcast address |
| Function code | 1 | 05H | Write a single coil |
| Start register address | 2 | 0000H | Coil 0 address |
| Write data | 2 | FF00H | FF00H: means the coil is closed |
| CRC check | 2 | XXXXH | CRC code (CRC16) of all previous data |
Slave machine answer:
The operation returns the original data successfully:
AA 05 00 00 FF 00 95 E1
Operation failure return:
AA 85 error code CRC_L CRC_H
2. Read coil
Host sends:
AA 01 00 00 00 01 E4 11
| Send content | Number of bytes | Send message | Remarks |
|---|---|---|---|
| Module address | 1 | AAH | 00H is the broadcast address |
| Function code | 1 | 01H | Reading coil |
| Start register address | 2 | 0000H | Coil 0 address |
| Read the quantity | 2 | 0001H | Can only be 0001H |
| CRC check | 2 | XXXXH | CRC code (CRC16) of all previous data |
Slave machine answer:
Operation returned successfully:
| Address | Function code | Return data length | Coil status | CRC_L | CRC_H |
|---|---|---|---|---|---|
| AA | 01 | 01 | 01 | B0 | 6C |
Coil status: 01H -> coil closed / 00H -> coil open
Operation failure return: AA 81 error code CRC_L CRC_H
3. Write device address
Host sends:
AA 41 00 00 00 12 A4 13
| Send content | Number of bytes | Send message | Remarks |
|---|---|---|---|
| Module address | 1 | AAH | 00H is the broadcast address |
| Function code | 1 | 41H | Set module address |
| Start register address | 2 | 0000H | Address |
| Module new address | 1 | 12H | 1 byte |
| CRC check | 2 | XXXXH | CRC code (CRC16) of all previous data |
Slave machine answer:
The operation returns the original data successfully:
AA 41 00 00 00 12 A4 13
Operation failure return:
AA C1 error code CRC_L CRC_H
4. Broadcast recovery device address
Host sends:
00 42 00 00 A0 30
| Send content | Number of bytes | Send message | Remarks |
|---|---|---|---|
| Broadcast address | 1 | 00H | 00H is the broadcast address |
| Function code | 1 | 42H | Restore the address as AAH |
| Start register address | 2 | 0000H | Address |
| CRC check | 2 | XXXXH | CRC code (CRC16) of all previous data |
Slave machine answer: No