Base LAN

SKU:K012-B

Description

Although M5 core is ESP32-based, having Wi-Fi integrated, it doesn't stop you enable the Ethernet function. This LAN is a M5 Base that having a W5500 chip, which is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connection to embedded systems. This Base is specifically design for industrial application scenarios, comes with couple of HT3.96 connectors, 485 metal rail and magnet discs for easy installation and fixation.The 6 pin of HT3.96 connector are dangling, you can wired them up with the M-BUS and other circuit as you like.

This product is EOL now.

Product Features

  • Input Supply Voltage: 9-24V
  • HT3.96 port for supporting RS485
  • Support RS485 communication
  • Easy to fixed on the wall

Include

  • 1x LAN Base
  • 1x TTL-to-RS485 adapter board
  • 1x pin header 20pin
  • 1x metal rails and magnet discs
  • 3x HT3.96 terminal
  • 2x 3pin
  • 1x 4pin
  • 10x cold crimp terminal(red Copper Lugs)
  • 3x HEX KEY   - 1x 1.5mm   - 1x 2mm   - 1x 2.5mm
  • 2x hexagon socket head cap screws M3x28
  • 4x hexagon socket tapping screw KA2x4
  • 1x countersunk head screw M3x8

Specification

Resources Parameter
Net weight 32g
Gross weight 132g
Product Size 54*54*28mm
Package Size 105*65*40mm

Applications

  • M5Core + LAN implementing a conveyor controller
  • PC transmits video to Core via cable

The figure below shows the inner of LAN

If you need to add RS485 interface, soldering the RS485 board onto the mian board pin correspondingly.

TTL-to-RS485 adapter board and LAN base

The figure below tells you how the TTL-to-RS485 adapter board connected onto LAN back plane

The serial port pins on the RS485 board will be connected to the GPIO16 and GPIO17 of the LAN back plane.

EasyLoader

download EasyLoader

  1. EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. This can be burned to the M5 device through simple steps, and a series of function verifications can be performed.

After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click "Burn" to burn the program (For M5StickC, set the baud rate to 115200 or 750000)

3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. Click here to download driver

PinMap

W5500

W5500 ESP32 Chip
MOSI GPIO23
MISO GPIO19
CLK GPIO18
CS GPIO26
RST GPIO13
INTn GPIO34

Schematic

Schematic

Example

Video

LAN Case - The PC uses the UDP protocol to transmit video to the Core via the LAN cradle