pdf-icon

Base LAN v1.2

SKU:K012-B-V12

Description

Base LAN v1.2 is an Ethernet controller base with a built-in W5500 full hardware TCP/IP embedded Ethernet controller (SPI communication interface), supporting multiple communication protocols (TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, etc.) and integrating storage buffers for easier Ethernet packet handling. Reserved expansion pads inside can be used to add RS485/RS232 communication adapter modules or custom designs. It comes standard with mounting rail accessories, combining performance and expansion flexibility to provide a more streamlined embedded Ethernet connection.

Features

  • Meets wired network access requirements in real production environments.
  • Specifically designed for industrial applications:
    • Metal slide rail for easy installation and mounting
    • Equipped with HT3.96 terminal for electrical connection
    • Supports input power voltage: 9-24V
  • Comes standard with TTL-RS485 + TTL-RS232 adapter boards to suit different communication interfaces.

Includes

  • 1 x Base LAN v1.2
  • 1 x RS485-To-TTL Adapter Board
  • 1 x RS232-To-TTL Adapter Board
  • 1 x HT3.96-4P Terminal
  • 2 x HT3.96-3P Terminals
  • 1 x Hex Key L-Shape 1.5mm
  • 1 x Hex Key L-Shape 2.0mm
  • 1 x Hex Key L-Shape 2.5mm
  • 10 x 2mm Cold-pressed Terminals
  • 1 x Magnet (with central hole, diameter 15mm, 3mm thick)
  • 1 x 35mm Silver Metal Rail
  • 1 x 35mm Black Rail Clip
  • 1 x M3*6mm Screw (Countersunk, machine thread)
  • 2 x M3*28mm Screws (Pan head, machine thread)
  • 4 x M2*5mm Screws (Pan head, self-tapping)
  • 1 x 2.54mm-20P Straight Pin Header (Total height 5.32mm)
  • 1 x Product Sticker

Applications

  • M5Core + LAN for transmission with controller

  • PC to Core wired video data transmission

Specifications

Specification Parameter
Ethernet Ctrl W5500
Network Port RJ45 adaptive 10/100M
Product Weight 32g
Gross Weight 132g
Product Size 54 x 54 x 28mm
Package Size 105 x 65 x 40mm

Learn

Expansion Board Soldering Position

Communication Expansion Board:
The LAN BASE V12 comes with TTL-RS485 + TTL-RS232 adapter boards to adapt to different communication interfaces. The soldering positions are as follows, and for actual GPIO connections please refer to the pin mapping table.
  • RS232 adapter board soldering position or RS485 adapter board soldering position

Schematics

PinMap

W5500 Ethernet Chip

W5500 ESP32 Chip
MOSI G23
MISO G19
CLK G18
CS G26
RST G13
INTn G34

RS485/RS232 Adapter Board

ESP32 Chip RS485/RS232
RX G5
TX G15

M5-Bus

Switch
The pins marked SW in the following M5-Bus can be switched via the DIP switch to adapt to different controllers.
PIN LEFT RIGHT PIN
GND 1 2 NC
GND 3 4 NC
GND 5 6 NC
SPI_MOSI 7 8 NC
SPI_MISO 9 10 CS
SPI_CLK 11 12 NC
NC 13 14 NC
NC 15 16 NC
NC 17 18 NC
NC 19 20 RS232_TX/RS485_TX (SW)
NC 21 22 RST
RS232_RX/RS485_RX (SW) 23 24 NC
HPWR 25 26 INT
HPWR 27 28 5V
HPWR 29 30 BAT

Datasheets

Softwares

Arduino

UiFlow1

EasyLoader

Easyloader Download Note
Base LAN Test Easyloader download /

Video

Base LAN Case - PC using UDP protocol with LAN Base for wired video transmission to Core\