Current Product Don't Have Test Firmware
Note: pls, use PC chrome/edge browser, if can't connect, refresh the webpage.
1. Click connect button
2. After connected successfully, pick a firmware
3. Click the burn button
4. After burning successfully, Unplug the device and restart.
RS232F Module 13.2 is an expansion module of
RS232 serial communication with isolation, using the scheme of
TD301D232H serial port conversion chip + Female DB9 interface to realize the interface conversion between RS232 and TTL/CMOS logic level signals, and using
F0505S-2WR3 DC-DC power module to realize electrical and noise isolation functions,
toggle switch and
coding switch It can realize the pass-through or cross-switching of DB9 signal lines and the switching of serial interfaces to meet different connection needs. The module has a built-in
DC power input socket and a corresponding
DC-DC circuit to provide power to the entire device. The product is
suitable for industrial automation, instrumentation, medical equipment and communication equipment.
|Communication rate||Up to 115200bps|
|Communication method||DB9 female interface with full-duplex communication and interface translation between RS232 and TTL/CMOS logic level signals|
|DC power interface input voltage||9-24V|