Module COMX LTE-Data is a stackable multifunctional LTE communication module with a built-in LTE module A7600C1, supporting LTE-TDD/LTE-FDD/EDGE/GPRS and GSM frequency bands, with a transmission rate of LTE.CAT4 standard. It features stable performance, compact size, and high cost-effectiveness, enabling low-power data transmission. The module comes with a DC power input, allowing external power supply of 5 ~ 12V. For user convenience in pin configuration, a DIP switch is used to set the pins. This module is particularly suitable for IoT industries such as remote meter reading, smart parking, and municipal management, where low power consumption and ultra-small size are core requirements.
Note
Compatibility
When used with the Fire controller, due to PSRAM pin (G16/G17) conflicts, please switch the module base DIP switch pins to TX(G0/G13), RX(G5/G15).
Features
Stackable design
External independent power supply
AT command control
SIM card type: MicroSIM
Status signal: Two LED indicators
External antenna: SMA antenna
Serial communication: UART 115200bps
Frequency bands:
LTE-TDD B34/B38/B39/B40/B41
LTE-FDD B1/B3/B5/B8
GSM/GPRS/EDGE 900/1800 MHz
Data transmission:
LTE Cat 1
Uplink max 5Mbps
Downlink max 10Mbps
EDGE
Uplink/Downlink max 236.8Kbps
GPRS
Uplink/Downlink max 85.6Kbps
Supported protocols
TCP/IP/IPV4/IPV6/MultiPDP/FTP/FTPS/HTTP/HTTPS/DNS
RNDIS/PPP/ECM
SSL
Includes
1 x Module COMX LTE-Data
1 x SMA antenna
Applications
Smart metering
Smart parking
Municipal management
Specifications
Specification
Parameters
Supported bands
LTE-TD/LTE-FDD/GPRS/EDGE/GSM
Network protocols
TCP/IP/UDP/HTTP/MQTT/FTP/DNS etc.
Communication method
UART 115200bps
DC interface specification
5.5mm
Net weight
54g
Gross weight
89g
Product dimensions
54 x 54 x 13.2mm
Package dimensions
165 x 60 x 36mm
Learn
Frequency bands for some country operators
The following content is not real-time information and is for reference only.
The module base has a DC power input interface. When using this interface to connect to a power supply, please strictly adhere to the input range (5-12V) to prevent module damage. The internal power DIP switch can adjust the voltage level of the internal terminal VIN to adapt to different modules.
Schematics
Module COMX module connection base schematic
PinMap
According to different host needs, switch the DIP switch to the corresponding pins.
