Unit AIN4-20mA
SKU:U162
Description
Unit AIN4-20mA is a single-channel 4~20mA current analog measurement unit. It uses the STM32G030F6 main control chip and communicates with the M5 host via I2C. It supports switching between internal or external power supply wiring modes through jumper caps. The onboard power isolation chip and built-in op-amp circuit can accurately measure external current sensors, ensuring signal accuracy and system safety. It is suitable for fields such as power system equipment monitoring, motor control, energy management, and automation and industrial process control.
Features
- STM32
- I2C communication
- Supports 2 or 4-wire sensors, switchable via jumper caps
- Built-in electrical isolation chip
- Supports Arduino, UIFlow, and other programming platforms
Includes
- 1 x Unit AIN4-20mA
- 1 x VH3.96-4.0P
- 1 x HY2.0-4P Grove connection cable (20cm)
- 3 x Jumper caps
Applications
- Power system equipment monitoring
- Motor control
- Energy management
- Automation and industrial process control
Specifications
Specification | Parameter |
MCU | STM32G030F6 (64 Kbytes of Flash/8 Kbytes of SRAM) |
Signal Isolation Chip | HCNR200 |
Op-Amp Chip | SGM321YC5/TR |
I2C Communication Address | 0x55 |
IN+ and IN- Input Impedance Typical Value | 200Ω |
Operating Temperature | 0 ~ 40°C |
Product Dimensions | 56 x 24 x 12mm |
Packaging Dimensions | 136 x 92 x 13mm |
Product Weight | 8.2g |
Gross Weight | 15.6g |
Learn
Jumper Cap Connection and Instructions
- If your current-type sensor already has external power, connect the jumper cap as shown in the left image.
- If your current-type sensor does not have external power, connect the jumper cap as shown in the right image, and connect an appropriate external power supply to the AIN4-20mA Unit interface as needed.
Schematics
PinMap
Unit AIN4-20mA
HY2.0-4P | Black | Red | Yellow | White |
PORT.A | GND | 5V | SDA | SCL |
Model Size
Datasheets
Softwares
Arduino
UIFlow 1.0
UIFlow 2.0
Internal Firmware
Protocol
