Arduino IDE environment - Core2 For AWS

Driver Installation

Click the link below to download the driver that matches the operating system. There are currently two driver chip versions, CP210X (for CP2104 version)/CP34X (for CH9102 version) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. (If you are not sure which USB chip your device uses, you can install two drivers at the same time. During the installation process of CH9102_VCP_SER_MacOS, an error may occur, but the installation is actually completed, just ignore it.)

Driver name Applicable driver chip Download link
CP210x_VCP_Windows CP2104 Download
CP210x_VCP_MacOS CP2104 Download
CP210x_VCP_Linux CP2104 Download
CH9102_VCP_SER_Windows CH9102 Download
CH9102_VCP_SER_MacOS CH9102 Download

Arduino-IDE

M5Stack's board management

    1. Open the Arduino IDE, select File->Preferences->Settings
    1. Copy the M5Stack board management URL below to the Additional Development Board Manager:

https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/arduino/package_m5stack_index.json

    1. Select Tools->Development Board:->Development Board Manager...
    1. In the new pop-up dialog box, enter and search for M5Stack, click Install (If the search fails, you can try to restart the Arduino program)
  • 5.Select Tools->Development board:->M5Stack Arduino, select the corresponding development board configuration according to the device we are using (M5Stack-Core2).
  • Different hardware devices have different sample program libraries. Please choose to download according to the device you are using. Open the Arduino IDE, and then select Project->Load Library->Library Management...

For M5Core2

  • Search for M5Core2 and install it, as shown in the figure below. When downloading, please follow the pop-up prompts to install related dependent libraries.

Hello World

  • Copy the code below to the Arduino IDE, connect M5Core2 to the PC and configure the correct port (Tools-> Port-> COMx), click the upload button (->) on the menu bar, the program will It will be automatically compiled and uploaded to the device. The program will print the "Hello World" string on the screen of M5Core2.

#include <M5Core2.h>

/* After M5Core2 is started or reset
the program in the setUp () function will be run, and this part will only be run once.
After M5Core2 is started or reset, the program in the setup() function will be executed, and this part will only be executed once. */
void setup(){
  M5.begin(); //Init M5Core2. Initialize M5Core2
                    /* Power chip connected to gpio21, gpio22, I2C device
                      Set battery charging voltage and current
                      If used battery, please call this function in your project */
  M5.Lcd.print("Hello World"); // Print text on the screen (string) Print text on the screen (string)
}

/* After the program in setup() runs, it runs the program in loop()
The loop() function is an infinite loop in which the program runs repeatedly
After the program in the setup() function is executed, the program in the loop() function will be executed
The loop() function is an endless loop, in which the program will continue to run repeatedly */
void loop() {

}
On This Page