Unit CatM GNSS

SKU:U137

Description

Unit CatM GNSS is an international version CatM & NB-IoT dual-mode wireless communication module supporting GNSS global positioning. It uses the SIM7080G module solution, covering most CatM & NB-IoT frequency bands worldwide, and can adapt to different data communication rate / throughput needs. The module uses serial communication, AT command control, and supports multiple communication protocols. It integrates dual SMA external antenna interfaces to enhance device communication quality and signal stability. It is very suitable for IoT applications such as remote control, remote monitoring, telemedicine, and mobile logistics positioning.

Features

• Integrated "communication + positioning", dual SMA antenna interface design
  • Communication part supports CatM, NBIoT modes, covering most CatM & NB-IoT frequency bands worldwide
    • Uplink and downlink speeds:
      • Cat-M: Uplink: 1119Kbps Downlink: 589Kbps
      • NB-IoT: Uplink: 150Kbps Downlink: 136Kbps
    • Supported protocols:
      • TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT and other communication protocols
    • Module certification:
      • Softbank/Telec/RoHS/REACH/JATE/Docomo/KDDI/RCM/CE (RED) /GCF Deutsche Telekom/FCC/PTCRB/AT&T/Verizon/T-Mobile/US Cellular/IC
  • Positioning part supports: GPS/GLONASS/BeiDou/Galileo
  • Built-in MicroSIM card slot
• Supports two power supply methods:
  • External DC9-24V (5.5/2.1mm DC jack) power input, built-in DC/DC conversion circuit, converting DC9-24V to DC5V, can simultaneously provide main control 5V power supply
  • External 5V power supply provided through HY2.0-4P cable
• Communication interface: UART (3.3V TTL), AT Command control
• Development platforms: Arduino, UIFlow
• Reserved four fixing holes, multiple fixing methods

Includes

• 1 x Unit CatM GNSS
• 1 x 4G Stick Antenna
• 1 x GPS Antenna
• 1 x HY2.0-4P Grove Cable (20cm)

Applications

• Remote Control
• Remote Monitoring
• Telemedicine
• Mobile Logistics Positioning

Specifications

Certifications

• Certificate

• SIM7080G_AT&T_Certificate_2020

• SIM7080G_GCF_Certificate_2020

• SIM7080G_NCC_2020

• SIM7080G_PTCRB_Certificate_2020

• SIM7080G_RCM_Compliance Certificate_2020

• SIM7080G_T-mobile_Certificate_2021

• SIM7080G_US Cellular_Certificate_2021

Schematics

PinMap

Unit CatM GNSS

Model Size

Datasheets

• Application
  • SIM7070_SIM7080_SIM7090 Series_CTBURST_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_CoAP(S)_Application Note_V1.03
  • SIM7070_SIM7080_SIM7090 Series_Email_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_FOTA_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_FS_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_FTP(S)_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_GNSS_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_HTTP(S)_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_Linux_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_Low Power Mode_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_LwM2M_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_MQTT(S)_Application Note_V1.03
  • SIM7070_SIM7080_SIM7090 Series_PING_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_SAT_Application Note_V1.02
  • SIM7070_SIM7080_SIM7090 Series_SSL_Application Note_V1.00
  • SIM7070_SIM7080_SIM7090 Series_TCPUDP(S)_Application Note_V1.03
• Datasheet
  • SIM7080_Series_SPEC_20200427

Softwares

Arduino

• Unit CatM GNSS Test Example

UiFlow1

Protocol

• AT Command
  • SIM7070_SIM7080_SIM7090 Series_AT Command Manual_V1.04