Unit RGB LED
SKU:A035/A035-B/A035-C/A035-D/A035-E
Description
Unit RGB LED is a programmable light strip that uses SK6812 LEDs. This light strip supports digital addressing, meaning you can individually control the color and brightness of each LED on the strip. It uses a single-bus programming interface, allowing for the expansion of the light strip. Note that as the number of connected LEDs increases, so does the power consumption. Therefore, when using a Unit RGB LED strip with a large number of LEDs, an additional power supply is required.
Features
- Available lengths: 10cm (15 LEDs) / 20cm (29 LEDs) / 0.5m (72 LEDs) / 1m (144 LEDs) / 2m (288 LEDs)
- Development platforms: Arduino, UIFlow (Blockly, Python)
- Expandable length
Includes
- 1 x Unit RGB LED
| Specification | Parameter |
|---|---|
| LED Model | SK6812 (3535) |
| Power | 18W/m |
| Data Transfer Rate | 800K/s |
| Operating Temperature | -40~80°C |
| Waterproof Level | Bare Board - Non-Waterproof |
| Product Size | 10.0 x 100.0/10.0 x 200.0/10.0 x 500.0/10.0 x 1000.0/10.0 x 2000.0mm |
| Product Weight | 4.0g/6.0g/10.0g/12.0g/34.0g |
| Package Size | 138.0 x 93.0 x 8.0mm |
| Gross Weight | 5.0g/7.0g/11.0g/13.0g/35.0g |
Learn
Signal Input/Output
The white PCB at the end of the strip is the signal input (connected to the main controller), and the black PCB is used for extending the strip.
PinMap
Unit RGB LED
| HY2.0-4P | Black | Red | Yellow | White |
|---|---|---|---|---|
| PORT.B | GND | 5V | LED Signal | NC |
Softwares
Arduino
UiFlow1
EasyLoader
| Easyloader | Download Link | Notes |
|---|---|---|
| Unit RGB LED Test Easyloader | download | / |
Video
RGB LED Demo-01
RGB LED Demo-02