RGB LED is an extendable strip light with built-in SK6812) RGB LED. Just in case you haven’t heard about RGB LED yet, RGB LED features digitally addressable LEDs, which means each led can display RGB color and brightness individually.
It is very easy to program by Single-BUS with simple protocol.
Another feature is the extension and flexibility, It's possible to connect many of them up together to create a massive long LED display. It's important to note that, the brightness and the quantity of LEDs matters the most to the power consuming, if you have a bunch of them connected up, you will need extra power supply.
Note: The black PCB board at the end of the light bar is for the light bar signal input (connect to the M5Core), and the white PCB board is used to extend the light bar.
|Lamp bead model||SK6812|
|Data transfer rate||800K/s|
|Waterproof rating||Bare board-not waterproof|
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed. .
|RGB LED Unit||Signal Pin||5V||GND|
Control a certain number of colored LEDs
Set index RGB color Set the color of the specified number of lights
Set from to RGB color Set the color of the light within the specified range
Set from to R G B Set the color of the light in the specified range to a custom color
Set all RGB color Set the color of all RGB lights
Set brightness Set the brightness of the RGB
Set neopixel hexagon matrix in Set the pattern on HEX and specify the color
et neopixel hexagon matrix in red green blue Set the pattern on HEX and customize the color
To get the complete code, please click here