AtomS3R-CAM

SKU:C126-CAM

Description

AtomS3R-CAM is a mini IoT programmable controller with an integrated camera. It is powered by the ESP32-S3-PICO-1-N8R8 SoC featuring Wi-Fi connectivity, 8MB on-chip Flash, and 8MB PSRAM. The unit carries a 5 V-to-3.3 V power-management circuit, a three-axis BMM150 geomagnetic sensor, and a six-axis BMI270 IMU. In addition, it is equipped with a 0.3 MP GC0308 camera that supports image acquisition and infrared transmission control. Protective glass is fitted in front of the camera to keep dust out and enhance image quality. Compared with previous products, the 3D antenna of AtomS3R-CAM has been enhanced to deliver higher performance and stability.

The factory firmware supports UVC (USB Video Class), allowing the device to work as a driver-free USB camera—simply connect via USB and use it directly. The product also features a USB Type-C port for power supply and firmware download, plus a HY2.0-4P expansion port. Six GPIOs and power pins are exposed on the bottom for further expansion. With compact dimensions of 24.0 x 24.0 x 13.5 mm, it is well suited for IoT monitoring, educational development tools, and other embedded scenarios.

Tutorial

UiFlow2

This tutorial shows you how to control the AtomS3R-CAM using the UiFlow2 graphical programming platform.

Arduino IDE

This tutorial shows you how to program and control the AtomS3R-CAM with the Arduino IDE.

Features

Integrated ESP32-S3-PICO-1-N8R8 SoC
0.3 MP GC0308 camera
9-axis sensor system (BMI270 6-axis IMU + BMM150 3-axis geomagnetic sensor)
8MB Flash and 8MB PSRAM
Supports infrared transmission control
Expandable pins and interfaces
Development Platform
- Arduino IDE
- ESP-IDF
- PlatformIO

Includes

1 x AtomS3R-CAM

Applications

Driver-free USB camera
Motion detection & orientation sensing
Wearable devices
Smart device control
IoT applications

Specifications

Specification	Parameter
SoC	ESP32-S3-PICO-1-N8R8 @ Xtensa® 32-bit LX7 dual-core processor, clock frequency 240MHz
USB	USB OTG, USB Serial/JTAG
Flash	8MB
PSRAM	8MB Octal
Wi-Fi	2.4 GHz Wi-Fi
6-axis IMU (BMI270)	Accuracy: 0.05 % (acceleration), 0.05 °/s (gyro) I2C address: 0x68
3-axis geomagnetic sensor (BMM150)	Accuracy: 0.3 µT. Mounted on BMI270, magnetometer data obtained via BMI270
Camera	GC0308. Max frame rate: 30 fps. Output formats: YCbCr4:2:2, RGB565, Raw Bayer. Aperture: F2.6. Resolution: 0.3 MP. Sensor size (diagonal): 1/6.5''. Field of view: FOV 57.6°
Camera panel material	Glass
Infrared IR	IR emission distance: 12.46 m @ ∠180° (unobstructed)
Sleep current	GPIO-5V supply: DC 5 V @ 11.63 µA; Grove-5V supply: DC 5 V @ 10.75 µA; USB-5V supply: DC 5 V @ 92.50 µA (including PD resistor loss)
Bottom GPIO	G5/G6/G7/G8/G38/G39
Operating temperature	0 ~ 40 °C
Product Size	24.0 x 24.0 x 13.5 mm
Product Weight	7.4 g
Package Size	85.0 x 65.0 x 14.3 mm
Gross Weight	13.6 g

Learn

BMM150 Magnetic Interference

Products containing magnets may interfere with the BMM150 magnetic sensor and cause abnormal readings. When used with M5 controllers that include magnets, please remove the magnets and avoid placing the BMM150 near strong magnetic fields.

Enable Camera

Before camera initialization, set GPIO18 low to enable power; this action also turns on the power indicator LED.

Download Mode

Connect the device to a computer via a USB Type-C data cable. Press and hold the power button until the internal green LED lights up, then release it. The green LED turns off, indicating that the device has entered download mode.

IMU Triaxial Direction Schematic Diagram

Schematics

1/2

PinMap

BMI270 & IR

ESP32-S3-PICO-1-N8R8	G0	G45	G47
BMI270 (0x68)	SYS_SCL	SYS_SDA
IR			IR_LED_DRV

BMM150

BMI270	BMI270_ASDx	BMI270_ASCx
BMM150	A_SDA	A_SCL

BMM150 Mounted on BMI270

The BMM150 is connected via the BMI270 Sensor Hub auxiliary I2C interface, providing unified 9-axis sensor data acquisition.

GC0308

GC0308	ESP32-S3-PICO-1-N8R8
CAM_SDA	G12
CAM_SCL	G9
VSYNC	G10
HREF	G14
Y9	G13
XCLK	G21
Y8	G11
Y7	G17
PCLK	G40
Y6	G4
Y2	G3
Y5	G48
Y3	G42
Y4	G46
POWER_N	G18

HY2.0-4P

HY2.0-4P	Black	Red	Yellow	White
PORT.CUSTOM	GND	5V	G2	G1

Model Size

Structure

AtomS3R-CAM Structure Files

Datasheets

Softwares

Arduino

UiFlow2

AtomS3R-CAM UiFlow2 Quick Start

PlatformIO

[env:m5stack-atoms3r]
platform = espressif32@6.7.0
board = esp32-s3-devkitc-1
framework = arduino
board_build.arduino.memory_type = qio_opi
build_flags =
    -DESP32S3
    -DBOARD_HAS_PSRAM
    -mfix-esp32-psram-cache-issue
    -DCORE_DEBUG_LEVEL=5
    -DARDUINO_USB_CDC_ON_BOOT=1
    -DARDUINO_USB_MODE=1
lib_deps =
    M5Unified=https://github.com/m5stack/M5Unified

ESP-IDF

AtomS3R-CAM Factory Firmware

Factory Firmware Function

The factory firmware provides both UVC and Wi-Fi video streaming functions. The UVC mode allows direct PC connection and image preview via any camera application. For Wi-Fi streaming, connect to the AP “AtomS3R-CAM-WiFi” and open 192.168.4.1 in a browser to view the stream.

Easyloader

Easyloader	Download	Note
AtomS3R-CAM User Demo Easyloader	download	/

Video

Product Comparison

Product Compare	AtomS3R-M12	AtomS3R-Cam
Camera	Image Sensor: OV3660 Max Frame Rate: 30 fps Output Formats: RAW RGB, RGB565/555/444, CCIR656, YCbCr422, and compression Aperture: F2.4 Resolution: 3 MP (3 megapixels) Focal Length: 1.8 ± 5 % mm Field of View (FOV): 120°	Image Sensor: GC0308 Max Frame Rate: 30 fps Output Formats: YCbCr4:2:2, RGB565, Raw Bayer Aperture: F2.6 Resolution: 0.3 MP (300 k pixels) Sensor Size (diagonal): 1/6.5'' Focal Length: 2.43 mm Field of View (FOV): 57.6°
Resolution	3 MP	0.3 MP
Communication	Supports UVC and Wi-Fi	Supports UVC and Wi-Fi
SoC	ESP32-S3-PICO-1-N8R8	ESP32-S3-PICO-1-N8R8
Memory	8MB Flash + 8MB PSRAM	8MB Flash + 8MB PSRAM
Sensor	BMI270 + BMM150	BMI270 + BMM150
Antenna	Enhanced 3D antenna	Enhanced 3D antenna

To compare information on the Atom series products, you can visit the Product Selection Table, check the target products, and get the comparison results. The selection table covers key information such as core parameters and functional features, and supports comparison of multiple products simultaneously.

Page Tools

PDF