Current Product Don't Have Test Firmware
Note: pls, use PC chrome/edge browser, if can't connect, refresh the webpage.
1. Click connect button
2. After connected successfully, pick a firmware
3. Click the burn button
4. After burning successfully, Unplug the device and restart.
Choose the development platform you want to use, view the corresponding tutorial&quick-Start.
This M5GO IoT Kit is a multi-Unit feast with 6 M5units inside (ENV II, IR, RGB, PIR, ANGLE, HUB). Just like other M5Stack development kit, M5GO is powered by ESP32.
Every M5stack development kit can be programmed through Arduino IDE, WebIDE UIFlow, Micropython, and Blockly, simplifying the development process for those requiring a joint hardware and software solution. Not only does M5stack have far-reaching IoT applications in industry, agriculture, and home, but it also empowers students to learn to code in STEM classrooms.
This M5GO kit is specifically designed for STEM education. The pack includes 1 M5GO controller + 6 M5units + plenty of accessories. Having all those goods, together with the Blockly program platform, allows the school students to explore the engineering world , making their own IoT product and implement brilliant ideas into real life.
Power on: click the red power button on the left
Power off: Quickly double-click the red power button on the left
Note: By default, when USB is powered, it cannot be shut down**
This product is EOL now.
|ESP32||240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi|
|Power Input||5V @ 500mA|
|Port||TypeC x 1, GROVE(I2C+I/0+UART) x 1|
|IPS Screen||2 inch, 320x240 Colorful TFT LCD, ILI9342C, max brightness 853nit|
|MEMS||BMM150 + MPU6886|
|Battery||500 mAh @ 3.7V|
|Antenna||2.4G 3D Antenna|
|Operating Temperature||0°C to 60°C|
|Product Size||54 x 54 x 21 mm|
|Package Size||147 x 90 x 40 mm|
|Case Material||Plastic ( PC )|
Click the link below to download the driver that matches the operating system. There are currently two driver chip versions (CP210X/CH9102). Please download the corresponding driver compressed package according to the version you are using. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. (If you are not sure of the USB chip used by your device, you can install both drivers at the same time. During the installation process of
CH9102_VCP_SER_MacOS v1.7, an error may occur, but the installation is actually completed, just ignore it.)
|Driver name||Applicable driver chip||Download link|
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
Load UIFlow firmware, built-in demo program supports testing of accelerometer, LED BAR, microphone, buttons and some peripheral sensors. The firmware can be used for UIFlow graphical programming.
LCD & TF card
LCD :320x240 TF card Maximum size 16GB
Button & Speaker
|Button Pin||BUTTON A||BUTTON B||BUTTON C|
GROVE Port A & IP5306
We’ve use the customized I2C version of IP5306 in power management. Its I2C address is 0x75. Click here to check its datasheet.
IP5306 charging/discharging,Voltage parameter
|0.00 ~ 3.40V -> 0%||4.20 ~ 4.07V -> 100%|
|3.40 ~ 3.61V -> 25%||4.07 ~ 3.81V -> 75%|
|3.61 ~ 3.88V -> 50%||3.81 ~ 3.55V -> 50%|
|3.88 ~ 4.12V -> 75%||3.55 ~ 3.33V -> 25%|
|4.12 ~ / -> 100%||3.33 ~ 0.00V -> 0%|
6-Axis MotionTracking Sensor MPU6886
MPU6886 I2C address 0x68
3-Axis Geomagnetic Sensor BMM150
BMM150 I2C address 0x10
GROVE Port B
GROVE Port C
LED Bar & Microphone & Speaker
|LED Bar||SIG Pin|
|8 channels||10 channels||2 channels||2 channels|
When using the RGB LED of gpio15, it is recommended to initialize,pinMode(15, OUTPUT_OPEN_DRAIN); For more information about Pin assignment and Pin Remapping, Please refer to ESP32 Datasheet
To complete schematic, click here . ( https://github.com/m5stack/M5-Schematic/blob/master/Core/Basic/M5-Core-Schematic(20171206).pdf )
|Release Date||Product Change||Note:|
|2018.4||Initial public release||/|
|2019.6||MPU9250 changed to MPU6886+BMM150||/|
|2019.7||TN screen changed to IPS screen||before use . pls upgrade your M5Stack lib to the latest version (after 0.2.8) to solve screen reverse color problem.|
|2019.11||Battery capacity changed from 600mAh to 500mAh||/|
|2020.6||The ENV Unit in the kit is changed to ENV II||/|
2018.2A PCB version of the device does not support C2C (TypeC to TypeC) connection and PD power supply.