StamPLC AC

SKU:A160

Description

StamPLC AC is an AC relay expansion module compatible with the StamPLC host. The module integrates AC load control and entire system power supply functions, effectively simplifying power wiring during application development. It features a contact-type relay (single-pole single-throw - normally open), supporting up to AC 240V@10A line switching. It also includes a built-in AC-DC isolated conversion circuit supporting AC 100 ~ 240V input, capable of simultaneously powering the relay load and providing a stepped-down DC 12V output for the main system. A programmable tri-color RGB LED is available for working status indication. The StamPLC controller communicates via the I2C protocol using an IO expansion chip to control the relay and RGB LED, effectively saving IO resources. This module is ideal for industrial-level applications such as AC load switching and solenoid valve control.

Tutorial

Arduino IDE

This tutorial introduces how to program and control StamPLC AC via Arduino IDE.

Features

Integrated power supply and control for simplified wiring
Contact-type relay
Built-in AC-DC isolated conversion circuit supporting AC 100 ~ 240V wide voltage input
Programmable tri-color LED for status indication
I2C protocol control
DIN rail / mounting hole installation
Development Platform
- Arduino
- UiFlow2

Includes

1 x StamPLC AC
2 x Fixed connectors

Applications

AC/DC load ON/OFF control
Solenoid valve control
Remote control of industrial equipment

Specifications

Specification	Parameter
AC-DC Conversion Module	Built-in AC-DC isolated conversion circuit (WCAL12-S12CA) Output power: DC 12V@1A (12W)
Relay	HF3FF/005-1HTF, 1-channel AC relay
Insulation Resistance	100MΩ (DC 500V)
Contact Rating	Capacity: AC 240V@10A Lifespan: ≥100,000 cycles (AC resistive load) Dielectric Strength: AC 1500V 1min
Operate Time	≤10ms
Release Time	≤5ms
Interface Type	2 × 8P 2.54mm female/male header, KF128-2P 5.0mm
Input Voltage	AC 100 ~ 240V
IO Expansion Chip	PI4IOE5V6408 I2C@0x44
RGB LED	1 × NH-B2020RGBA-HF
Installation Method	DIN rail / mounting hole
Product Size	80.5 x 50.5 x 27.1mm
Product Weight	73.6g
Package Size	82.0 x 60.0 x 28.0mm
Gross Weight	80.9g

Learn

Power Supply Instruction

When using the input power of StamPLC AC to provide power for the entire system, the AC-DC circuit will step down to DC 12V for the system power supply. In this case, do not connect any additional power sources other than DC 12V at the StamPLC side simultaneously, otherwise device damage may occur.

StamPLC and StamPLC AC Connection Diagram

Schematics

StamPLC AC Schematics PDF

1/1

PinMap

IO Expansion Chip

PI4IOE5V6408 (0x44)	P2	P5	P6	P7	SCL	SDA
StamPLC AC	REL_EN	SYS_LEDR	SYS_LEDG	SYS_LEDB
StamPLC					G15	G13

StamPLC-Bus

PIN	LEFT	RIGHT	PIN
VIN	1	2	GND
GND	3	4	GND
GND	5	6	EXT_5V
SCL	7	8	SDA
PHY_RST	9	10
	11	12
	13	14
	15	16

Model Size

StamPLC AC Model Size PDF