SKU:K134-V11


























DinMeter v1.1 is an iterative upgrade of the DinMeter product, with the core enhancement being the main control module upgraded from Stamp-S3 to Stamp-S3A. DinMeter v1.1 adopts the 1/32 DIN standard digital meter cutout size, allowing direct installation into reserved mounting openings of mainstream equipment such as industrial control cabinets and PLC control boxes, without the need for custom brackets or panel modifications. This significantly reduces integration cost and assembly time. It supports two mounting methods—double-sided adhesive and screw hole fixation—to meet installation requirements in different scenarios. The product integrates a 1.14-inch ST7789 display and a rotary encoder with button, enabling precise knob position tracking and interactive operation. An onboard RTC real-time clock, buzzer, and function buttons support scheduled reminders and wake-up functions. The power supply design is flexible, supporting a wide DC input range of 6 ~ 36V, and includes a lithium battery interface with charging circuitry to adapt to various power scenarios. In addition, the development board provides PORT.A and PORT.B expansion interfaces for easy connection of I2C and GPIO peripherals, making it suitable for various embedded instrumentation display and control input applications.
| Specification | Parameter |
|---|---|
| SoC | ESP32-S3FN8 @ Xtensa® 32-bit LX7 dual-core processor, clock frequency 240MHz |
| Flash | 8MB |
| Wi-Fi | 2.4 GHz Wi-Fi |
| USB | USB OTG, USB Serial/JTAG |
| Wide Voltage Input Range | 6 ~ 36V |
| Display Driver | ST7789P3 |
| Display Resolution | 135 x 240 |
| Charging Current | 100mA |
| Grove Load Capability | PORT.A Load: DC 5V@220mA PORT.B Load: DC 5V@220mA |
| Standby Current (Battery Power) | DC 4.2V@38.4uA |
| Battery Socket Specification | MX1.25-2P |
| Power Supply Methods | USB / DC Power / Battery |
| Operating Temperature | 0 ~ 40°C |
| Product Size | 53.0 x 30.0 x 32.0mm |
| Product Weight | 17.8g |
| Package Size | 136.0 x 95.0 x 24.0mm |
| Gross Weight | 44.9g |
WAKE button or wake it via an IRQ signal triggered by the RTC timer. After the wake-up signal is triggered, set the HOLD (GPIO46) pin to high (1) in the program initialization to maintain power; otherwise, the device will return to sleep.RST button;
(2) Set HOLD (GPIO46) to 0 during program execution to cut off battery power.With the device powered off, press and hold the G0 button on the Stamp-S3A while connecting the device to a computer via a USB Type-C data cable. Release the button after the device is powered on; the device enters download mode.
Three power supply methods are provided: USB / DC / BAT
DIN Size Standard


| ESP32-S3FN8 | G12 | G11 | G40 | G41 | G3 | G42 |
|---|---|---|---|---|---|---|
| RTC8563 | SCL | SDA | ||||
| ENCODER | B | A | ||||
| BEEP | beep | |||||
| BUTTON (ENCODER) | BTN(WAKE) |
| ESP32-S3FN8 | G7 | G6 | G4 | G5 | G8 | G9 |
|---|---|---|---|---|---|---|
| ST7789P3 | CS | SCK | RS | MOSI | RESET | BL |
| HY2.0-4P | Black | Red | Yellow | White |
|---|---|---|---|---|
| PORT.A | GND | 5V | G13 | G15 |
| PORT.B | GND | 5V | G2 | G1 |
| Easyloader | Download | Note |
|---|---|---|
| DinMeter User Demo Easyloader | download | / |
| Product Compare | DinMeter v1.1 ![]() | DinMeter ![]() |
|---|---|---|
| Main Controller | Stamp-S3A | Stamp-S3 |