EasyLoader (beta)

Current Product Don't Have Test Firmware

Note: pls, use PC chrome/edge browser, if can't connect, refresh the webpage.

1. Click connect button

2. After connected successfully, pick a firmware

3. Click the burn button

4. After burning successfully, Unplug the device and restart.

0%

IR

SKU:U002

Description

IR is a pair of infrared photoelectric sensors from the M5Go Kit family. Contains 1x infrared emitter and 1x receiver.

IR remote control is widely used in consumer electronics, it can be used to operate devices such as a television set, DVD player, or other home appliance, from a short distance. Since this unit comes with emitter and receiver, you can practice not only on IR encode but also on IR decode.

Product Features

  • 1x infrared emitter(wavelength:940nm)
  • 1x infrared receiver
  • Distance range: < 5m
  • Software Development Platform: Arduino, UIFlow(Blockly,Python)
  • Two Lego-compatible holes

Include

  • 1x IR Unit
  • 1x Grove Cable

Specification

Resources Parameter
infrared emitter wavelength 940nm
Net weight 4g
Gross weight 17g
Product Size 32*24*8mm
Package Size 67*53*12mm

EasyLoader

download EasyLoader

1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed. .

  1. After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click "Burn" to start burning. (For M5StickC burning, please Set the baud rate to 750000 or 115200)
  1. Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller) Click here to view the driver installation tutorial

Schematic

PinMap

M5Core(GROVE B)GPIO36GPIO265VGND
IR UnitReceiver PinTransmitter Pin5VGND

Learn

Night Lamp with Atom Lite, Neopixel Strip and IR Remote
This project replaced my daughter's old, broken night lamp. Its main components are: Atom Lite ESP32, neopixel strip, IR unit.

Example

Arduino

To get the complete code, please click here

UIFlow

Feature Introduction

Launch or accept infrared remote control signals

  • state Received infrared signal returned 1

  • set on Send infrared signal

  • set off Stop sending

Usage

To get the complete code, please click here

Last updated: 2020-12-11