Choose the development platform you want to use, view the corresponding tutorial&quick-Start.
M5StickC is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will take away a lot of pains from the development process.M5stickC is one of the core devices in M5Stack product series.
It is built in a continually growing hardware and software ecosystem. It has a lot of compatible modules and units, as well as the open source code & engineering communities that will help you maximize your benefits in every step of the developing process.
Power switch operation：
Power on ：Press power button for 2 seconds
Power off ：Press power button for 6 seconds
The input range of VBUS_VIN and VBUS_USB is limited to 4.8-5.5V, and the internal battery will be charged through AXP192 power management when VBUS is powered.
UnitV/M5StickV/M5StickC/ATOM may not work without driver in some systems. Users can manually install FTDI driver to fix this problem. Take the win10 environment as an example, download the driver file that matches the operating system, decompress it, and install it through the device manager. (Note: In some system environments, the driver needs to be installed twice for the driver to take effect. The unrecognized device name is usually
USB Serial. Windows recommends using the driver file to install directly in the device manager (custom Update), the executable file installation method may not work properly).
|ESP32||240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth|
|Power Input||5V @ 500mA|
|Port||TypeC x 1, GROVE(I2C+I/0+UART) x 1|
|LCD screen||0.96 inch, 80*160 Colorful TFT LCD, ST7735S|
|Button||Custom button x 2|
|Battery||95 mAh @ 3.7V|
|Antenna||2.4G 3D Antenna|
|PIN port||G0, G26, G36|
|Operating Temperature||32°F to 104°F ( 0°C to 40°C )|
|Case Material||Plastic ( PC )|
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please click here to view the CP210X driver installation tutorial, M5StickC/V/T/ATOM series can be used without driver)
Power structure block diagram
RED LED & IR Transmitter & BUTTON A & BUTTON B
|RED LED||LED Pin|
|IR Transmitter||Transmitter Pin|
|BUTTON A||Button Pin|
|BUTTON B||Button Pin|
Resolution：80 * 160
6-Axis posture sensor (SH200Q/MPU6886) & power management IC (AXP192)
|6-Axis IMU sensor||SCL||SDA|
|power management IC||SCL||SDA|
|Microphone||RTC||TFT backlight||TFT IC||ESP32/3.3V MPU6886/SH200Q||5V GROVE|
Charging current measured value
|charging current||Fully charged current(Power OFF)||Fully charged current(Power ON）|
|Release Date||Product Change||Note：|
|2019.3||Initial public release||/|
|2019.8||SH200Q changed to MPU6886||/|
|2019.10||Upgrade the bottom and add copper nuts||/|
|2020.3||Battery capacity changed from 80mAh to 95mAh||/|
For a tutorial on uiflow, see here