Product Guide
Linux
LLM
Real-Time AI Voice Assistant
Smart Home
M5Paper
IoT Tools
VAMeter
IoT Cloud
AWS IoT Core
Ethernet Camera
PoECAM
Wi-Fi Camera
Unit CamS3
Ai Camera
LoRa & LoRaWAN
Motor Control
Develop Tools
Network
Restore Factory Firmware
Easyloader
M5CoreS3 XiaoZhi Voice Assistant
Case Description
This tutorial will use the
CoreS3
microcontroller unit (MCU) and burn
the XiaoZhi Voice Assistant firmware through M5Burner to build a personal voice assistant application.
1.Preparations
1.Depending on your operating system, click the button below to download the corresponding M5Burner firmware burning tool. Unzip and open the application.
2.Firmware Burning
- Double-click to open the Burner tool, select the corresponding device type
CoreS3in the left menu, and click to downloadthe XiaoZhi Voice AssistantFor CoreS3 firmware. (Note: This firmware is also compatible with CoreS3 SE)
Firmware Version
M5Burner provides multiple versions of
the XiaoZhi Voice Assistant For CoreS3 firmware, with slight differences in functions and operations.| Firmware version | Applicable master control | Operation instruction | remark |
|---|---|---|---|
| v0.9.9-NiHaoXiaoZhi | CoreS3 / CoreS3 SE | Use the wake-up word Hello little wisdom to wake up and interact | Supports voice wake words |
| v0.9.9-HiLeXin | CoreS3 / CoreS3 SE | Use the wake word Hi, Happy Xin to wake up and interact | Supports voice wake words |
| v0.9.9-HiM5 | CoreS3 / CoreS3 SE | Use the wake word Hi, M5 to wake up and interact | Supports voice wake words |
- 2.Connect the device to a USB port, press and hold the reset button (for about 2 seconds) until the internal green LED lights up, then release it. The device has entered the download mode and is ready for burning.
.gif)
- 3.Select the corresponding port for your device. Click
Burnand wait for the burning process to complete.
3.Wi-Fi Configuration
- After the device starts, it will prompt you to connect to the AP hotspot and visit
192.168.4.1to enter the network configuration page.
- 2.Complete the
Wi-Ficonfiguration according to the prompts on the page.
4.Register for XiaoZhi AI
Visit the XiaoZhi AI Control Panel , register, and log in to your account.
2.Tap the CoreS3 screen. During the initial configuration, it will prompt
Please log in to the control panel to add a deviceand display a verification code.
- 3.Add the verification code to the XiaoZhi
AIControl Panel to bind the device. For multiple devices, you can also set aliases for distinction.
5.Getting Started
- After completing the above configurations, tap the
CoreS3screen again to start a conversation.
6.Related Videos
coming soon...