Product Guide
Linux PC
Industrial Control
LLM
Real-Time AI Voice Assistant
AtomS3R-M12 Volcengine Kit
Offline Voice Recognition
Zigbee
IoT Measuring Instruments
VAMeter
IoT Cloud
AWS IoT Core
Ethernet Camera
PoECAM
Wi-Fi Camera
Unit CamS3
AI Camera
LoRa & LoRaWAN
Motor Control
Network
Restore Factory Firmware
DIP Switch Usage Guide
Module GPS v2.0
Module GNSS
Module ExtPort For Core2
Module LoRa868 V1.2
M5CoreS3 Factory Firmware
Factory Firmware
When the device encounters operational issues, you can try re-flashing the factory firmware to check if there is any hardware malfunction. Refer to the following tutorial. Use the M5Burner firmware flashing tool to flash the factory firmware onto the device.
1. Preparation
- Refer to the M5Burner tutorial to complete the firmware flashing tool download, and then refer to the image below to download the corresponding firmware.
2. Download Mode
- Long press the reset button (for about 2 seconds) until the internal green LED lights up, then release the button. The device is now in download mode, waiting for the program to be uploaded.
.gif)
3. Port Selection
Connect the device to the computer via a USB cable. After the device enters download mode, the corresponding device port can be selected in M5Burner.
4.Burn
Click "Burn" to start the flashing process.
The effect is as shown below:
