Arduino Guide
1. Arduino Setup
2. API & Examples
M5Tough
M5NanoC6
M5.getBoard()
List of development boards that can be obtained with M5.getBoard()
| Board | Value |
|---|---|
| M5Stack | m5::board_t::board_M5Stack |
| M5StackCore2 | m5::board_t::board_M5StackCore2 |
| M5StickC | m5::board_t::board_M5StickC |
| M5StickCPlus | m5::board_t::board_M5StickCPlus |
| M5StackCoreInk | m5::board_t::board_M5StackCoreInk |
| M5Paper | m5::board_t::board_M5Paper |
| M5Tough | m5::board_t::board_M5Tough |
| M5Station | m5::board_t::board_M5Station |
| M5Atom | m5::board_t::board_M5Atom |
| M5AtomPsram | m5::board_t::board_M5AtomPsram |
| M5AtomU | m5::board_t::board_M5AtomU |
| M5TimerCam | m5::board_t::board_M5TimerCam |
| M5StampPico | m5::board_t::board_M5StampPico |
| M5StampC3 | m5::board_t::board_M5StampC3 |
| M5StampC3U | m5::board_t::board_M5StampC3U |
M5.config()
List of items that can be set by M5.config()
| Argument | Type | Description | Initial Value | Remarks |
|---|---|---|---|---|
| serial_baudrate | uint32_t | USB serial baud rate | 115200 | Arduino-esp32 only |
| clear_display | bool | clear the screen when the device is started or not | true | valid only for devices with a screen |
| output_power | bool | external 5V output ON(true)/OFF(false) | true | only for devices with AXP192 |
| internal_imu | bool | whether internal IMU is used or not | true | valid only for models with IMU |
| internal_rtc | bool | whether to use built-in RTC or not | true | only for the models with RTC |
| internal_spk | bool | whether to use built-in speaker or not | true | only available on models with speaker |
| internal_mic | bool | whether to use built-in microphone or not | true | available only for the model with microphone |
| external_imu | bool | whether to use Unit IMU or Accel | false | for Unit IMU(*1) and Accel(*2) |
| external_rtc | bool | Whether Unit RTC is used or not | false | For Unit RTC(*3) |
| external_spk | bool | use external speaker or not | false | for SPK_HAT(*4) or ATOMIC_SPK(*5) |
| led_brightness | uint8_t | brightness of built-in LED (0~255) | 0 | valid only for models with built-in LED (not for RGBLED) |
*1 Unit IMU
*2 Unit Accel
*3 Unit RTC
*4 SPK HAT
M5.Speaker.config()
List of items that can be set by M5.Speaker.config()
| Item | Type | Parameter | Initial value | Remarks |
|---|---|---|---|---|
| pin_data_out | int | I2S Data Out | -1 | GPIO |
| pin_bck | int | I2S bck | -1 | GPIO |
| pin_ws | int | I2S WS(LRCK) | -1 | GPIO |
| sample_rate | uint32_t | sample rate(Hz) | 64000 | stereo |
| stereo | bool | whether the data to be handled is stereo or not | false | |
| buzzer | bool | whether buzzer output is used or not | false | if buzzer is used, only pin_data_out needs to be set |
| use_dac | bool | use built-in DAC for output | false | setting is only for pin_data_out (GPIO_NUM_25 or GPIO_NUM_26) |
| dac_zero_level | unit8_t | zero level reference value when DAC is used | 0 | 0: Dynamic Change |
| magnification | uint8_t | multiplier for output value | 16 | 16 |
| dma_buf_len | size_t | length of I2S DMA buffer | 128 | |
| dma_buf_count | size_t | number of I2S DMA buffers | 8 | |
| task_priority | UBasetype_t | priority of speaker playback task | 2 | |
| task_pinned_core | Basetype_t | core to which speaker playback task is assigned | -1 | |
| i2s_port | i2s_port_t | I2S port | i2s_port_t::I2S_NUM_0 | 0 or 1 |
About buttons
The buttons available for each model are as follows.
| Device | BtnA | BtnB | BtnC | BtnPWR | BtnEXT |
|---|---|---|---|---|---|
| M5Stack Basic/Gray/Fire | GPIO39 | GPIO38 | GPIO37 | - | - |
| M5Stack Core2 | TouchA | TouchB | TouchC | - | |
| M5Stick C/CPlus | GPIO39 | GPIO37 | - | AXP192 | - |
| M5Stack CoreInk | GPIO37(Up) | GPIO38(Press) | GPIO39(Down) | GPIO27 | GPIO5 (*1) |
| M5Paper | GPIO37(Up) | GPIO38(Press) | GPIO39(Down) | - | - |
| M5Station | GPIO37 | GPIO38 | GPIO39 | AXP192 | - |
| M5Tough | - | - | - | AXP192 | - |
| M5Atom/M5StampPico | GPIO39 | - | - | - | - |
| M5StampC3 | GPIO3 | - | - | - | - |
| M5StacmC3U | GPIO9 | - | - | - | - |
*1. Top button of CoreInk