Atom Socket

Example

This program remotely controls the device via the MQTT protocol, monitoring the load’s voltage, current, and power, and starts a web server in AP mode to poll data. When button A is pressed, the relay state toggles (on/off), and the RGB LED color updates to indicate the status.

from m5stack import *
from m5ui import *
from uiflow import *
from base.Socket_Kit import Socket
import time

button_next = None

sock = Socket()

from numbers import Number

def buttonA_wasPressed():
  global button_next
  button_next = (button_next if isinstance(button_next, Number) else 0) + 1
  if button_next == 1:
    sock.set_relay_state(1)
  elif button_next == 2:
    sock.set_relay_state(0)
    button_next = 0
  pass
btnA.wasPressed(buttonA_wasPressed)

button_next = 0
sock.remote_control(1)
print(sock.pub_topic)
print((str('This is Subscribe Topic(Relay State), Use Remote User: ') + str((sock.sub_topic_relay))))
print((str('This is Subscribe Topic(Parameter Status), Use Remote User: ') + str((sock.sub_topic_data))))
while True:
  if sock.wait_update_data():
    print((str('Voltage(V): ') + str((sock.get_voltage()))))
    print((str('Current(mA): ') + str((sock.get_current()))))
    print((str('Power(W): ') + str((sock.get_active_power()))))
    sock.server_loop()
    wait(1)
  button_next = int((sock.get_relay_status()))
  if button_next:
    rgb.setColorAll(0x009900)
  else:
    rgb.setColorAll(0xff0000)
  wait_ms(2)
 