Module 4in8out

Example

from m5stack import *
from m5ui import *
from uiflow import *
import module

import time

setScreenColor(0x222222)
i = None
module_4in8out = module.get(module.MODULE_4IN8OUT)

module_4in8out.init_i2c_address(0x45)
print((str('Module Firmware Version:') + str((module_4in8out.read_status(0XFE)))))
while True:
  for i in range(8):
    module_4in8out.write_output_pin(i, 1)
  wait(1)
  for i in range(8):
    module_4in8out.write_output_pin(i, 0)
  wait(1)
  for i in range(4):
    print((str('CH') + str(((str(i) + str(((str(' Input :') + str((module_4in8out.read_input_pin(i)))))))))))
  wait_ms(2)

API

module_4in8out.init_i2c_address(0x45)

• Initializes the I2C address of the device.

module_4in8out.read_input_pin(0)

• Retrieves the status or value of the input channel.

module_4in8out.read_status(0XFE)

• Retrieves the status information of the device, selecting to get the firmware version (FW_VERSION).

module_4in8out.set_i2c_address(0x45)

• Sets the I2C address of the device.

module_4in8out.write_output_pin(0, 1)

• Controls the status of the output channel. This example sets the output status of channel 0, with options to set it to "ON" or "OFF." This is used to control devices or circuits connected to the channel, such as turning a relay or LED on or off.

Video