
Arduino入門
StickCPlusのバッテリー状態読み取りに関するAPIとサンプルプログラムです。
#include <M5Unified.h>
void setup() {
M5.begin();
M5.Power.setBatteryCharge(true);
M5.Display.setRotation(1);
M5.Display.fillScreen(TFT_BLACK);
M5.Display.setTextFont(2);
M5.Display.setTextSize(1);
M5.Display.setTextColor(TFT_GREEN, TFT_BLACK);
}
void loop() {
M5.update();
const int32_t level = M5.Power.getBatteryLevel();
const int32_t voltage = M5.Power.getBatteryVoltage();
const int32_t current = M5.Power.getBatteryCurrent();
M5.Display.setCursor(8, 6);
M5.Display.print("BATTERY STATUS");
M5.Display.setCursor(8, 32);
M5.Display.printf("CHARGE : %-3s",
M5.Power.isCharging() ? "YES" : "NO");
M5.Display.setCursor(8, 58);
M5.Display.printf("BATTERY: %3d %% ", level);
M5.Display.setCursor(8, 84);
M5.Display.printf("VOLTAGE: %5d mV", voltage);
M5.Display.setCursor(8, 110);
M5.Display.printf("CURRENT: %5d mA", current);
delay(2000);
}このプログラムはバッテリーの充電状態、残量パーセント、電圧(mV)、電流(mA)を画面に表示し、約2秒ごとに更新します。
StickC Plusの電源機能はM5UnifiedライブラリのPower_Classを使用しています。関連APIの詳細については、以下のドキュメントを参照してください: